• Part: 74LV125
  • Description: Quad buffer/line driver
  • Manufacturer: Philips Semiconductors
  • Size: 111.47 KB
Download 74LV125 Datasheet PDF
Philips Semiconductors
74LV125
74LV125 is Quad buffer/line driver manufactured by Philips Semiconductors.
FEATURES - Wide operating voltage: 1.0 to 5.5 V - Optimized for Low Voltage applications: 1.0 to 3.6 V - Accepts TTL input levels between VCC = 2.7 V and VCC = 3.6 V - Typical VOLP (output ground bounce) < 0.8 V at VCC = 3.3 V, - Typical VOHV (output VOH undershoot) > 2 V at VCC = 3.3 V, - Output capability: bus driver - ICC category: MSI QUICK REFERENCE DATA GND = 0 V; Tamb = 25°C; tr = tf ≤ 2.5 ns SYMBOL t PHL/t PLH CI CPD PARAMETER Propagation delay n A to n Y Input capacitance Power dissipation capacitance per buffer Tamb = 25°C. Tamb = 25°C. DESCRIPTION The 74LV125 is a low-voltage Si-gate CMOS device and is pin and function patible with 74HC/HCT125. The 74LV125 consists of four non-inverting buffers/line drivers with 3-state outputs. The 3-state outputs (n Y) are controlled by the output enable input (n OE). A HIGH at n OE causes the outputs to assume a high impedance OFF-state. CONDITIONS CL = 15 p F; VCC = 3.3 V VCC = 3.3 V; VI = GND to VCC1 TYPICAL 9 3.5 22 UNIT ns p F p F NOTE: 1. CPD is used to determine the dynamic power dissipation (PD in µW) PD = CPD × VCC2 × fi )ȍ (CL × VCC2 × fo) where: fi = input frequency in MHz; CL = output load capacitance in p F; fo = output frequency in MHz; VCC = supply voltage in V; ȍ (CL × VCC2 × fo) = sum of the outputs. ORDERING INFORMATION PACKAGES 14-Pin Plastic DIL 14-Pin Plastic SO 14-Pin Plastic SSOP Type II 14-Pin Plastic TSSOP Type I TEMPERATURE RANGE - 40°C to +125°C - 40°C to +125°C - 40°C to +125°C - 40°C to +125°C OUTSIDE NORTH AMERICA 74LV125 N 74LV125 D 74LV125 DB 74LV125 PW NORTH AMERICA 74LV125 N 74LV125 D 74LV125 DB 74LV125PW DH PKG. DWG. # SOT27-1 SOT108-1 SOT337-1 SOT402-1 PIN DESCRIPTION PIN NUMBER 1, 4, 10, 13 2, 5, 9, 12 3, 6, 8, 11 7 14 SYMBOL 1OE - 4OE 1A - 4A 1Y - 4Y GND VCC NAME AND FUNCTION FUNCTION TABLE INPUTS n OE Data enable inputs (active LOW) Data inputs Data Outputs Ground (0 V) Positive supply voltage L L H NOTES: H = HIGH voltage level L = LOW voltage level X = don’t care Z = high impedance...