NE5018 Datasheet PDF (8-Bit mp-compatible D/A converter)

NE5018 - 8-Bit mp-compatible D/A converter

Description

The NE/SE5018/19 is a complete 8-bit digital-to-analog converter subsystem on one monolithic chip.

The data inputs have input latches which are controlled by a latch enable pin.

The data and latch enable inputs are ultra-low loading for easy interfacing with all logic systems.

Features

8-bit resolution.
Input latches.
Low-loading data inputs.
On-chip voltage reference.
Output buffer amplifier.
Accurate to ± LSB (0.19%).
Monotonic to 8 bits.
Amplifier and reference both short-circuit protected.
Compatible with 8085, 6800 and many other µPs.

Datasheet Details

Part number	NE5018
Manufacturer	Philips
File Size	69.87 KB
Description	8-Bit mp-compatible D/A converter
Datasheet	NE5018 Datasheet
Additional preview pages of the NE5018 datasheet.

📁 Similar Datasheet

NE500100 - C-Band Medium Power GaAs MESFET (NEC Electronics)

NE500199 - C-Band Medium Power GaAs MESFET (NEC Electronics)

NE5008 - 8-Bit High Speed Multiplying D/A Converter (NXP)

NE5045 - Seven-Channel RC Decoder (Signetics)

NE5045 - Seven-Channel RC Decoder (Ideal Semiconductor)

NE5050 - Power line modem (NXP)

NE5080 - High Speed FSK Modem Transmitter (NXP)

NE5081 - High Speed FSK Modem Receiver (NXP)

NE521 - High-Speed Dual-Differential Comparator/Sense Amp (ON Semiconductor)

NE52118 - L to S BAND LOW NOISE AMPLIFIER NPN GaAs HBT (NEC)

Full PDF Text Transcription

Click to expand full text

Philips Semiconductors Linear Products Product specification 8-Bit µp-compatible D/A converter NE/SE5018/5019 DESCRIPTION The NE/SE5018/19 is a complete 8-bit digital-to-analog converter subsystem on one monolithic chip. The data inputs have input latches which are controlled by a latch enable pin. The data and latch enable inputs are ultra-low loading for easy interfacing with all logic systems. The latches appear transparent when the LE input is in the low state. When LE goes high, the input data present at the moment of transition is latched and retained until LE again goes low. This feature allows easy compatibility with most microprocessors. The chip also comprises a stable voltage reference (5V nominal) and high slew rate buffer amplifier.

Published: May 12, 2005 |