Datasheet4U Logo Datasheet4U.com

SA5230 - Low voltage operational amplifier

Description

The NE5230 is a very low voltage operational amplifier that can perform with a voltage supply as low as 1.8V or as high as 15V.

In addition, split or single supplies can be used, and the output will swing to ground when applying the latter.

Features

  • Works down to 1.8V supply voltages.
  • Adjustable supply current.
  • Low noise.
  • Common-mode includes both rails.
  • VOUT within 100mV of both rails.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SA5230 Low Voltage Operational Amplifier ON Semiconductor
SA52 13.2MM SINGLE DIGIT NUMERIC DISPLAYS ETC
SA52-11 13.2 MM SIGNLE DIGIT NUMERIC DISPLAYS ETC
SA52-11 SINGLE DIGIT NUMERIC DISPLAYS Kingbright Electronic
SA52-11EWA 13.2MM SINGLE DIGIT NUMERIC DISPLAYS ETC

Other Datasheets by Philips Semiconductors (now NXP Semiconductors)

Part Number Description
SA5232 Matched dual high-performance low-voltage operational amplifier
SA5234 Matched quad high-performance low-voltage operational amplifier
SA5200 RF dual gain-stage
SA5204 Wide-band high-frequency amplifier
SA5205 Wide-band high-frequency amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
INTEGRATED CIRCUITS NE/SA5230 Low voltage operational amplifier Product specification 1994 Aug 31 Philips Semiconductors Philips Semiconductors Product specification Low voltage operational amplifier NE/SA5230 DESCRIPTION The NE5230 is a very low voltage operational amplifier that can perform with a voltage supply as low as 1.8V or as high as 15V. In addition, split or single supplies can be used, and the output will swing to ground when applying the latter. There is a bias adjusting pin which controls the supply current required by the device and thereby controls its power consumption. If the part is operated at ±0.9V supply voltages, the current required is only 110µA when the current control pin is left open.
Published: |