Datasheet4U Logo Datasheet4U.com

SA702 - Divide by: 64/65/72 triple modulus low power ECL prescaler

Description

The SA702 triple modulus (Divide By 64/65/72) low power ECL prescaler is used in synthesizer systems to achieve low phase lock time, broad operating range, high reference frequency and small frequency step sizes.

Features

  • Low voltage operation.
  • Low current consumption.
  • Operation up to 1.1GHz.
  • ESD hardened.

📥 Download Datasheet

📁 Similar Datasheet

  • SA702 - SILICON GATE ENHANCEMENT MODE RF POWER VDMOS TRANSISTOR (Polyfet RF Devices)
  • SA70 - AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSORS (MIC)
  • SA70 - Transient Voltage Suppression (TVS) Diodes (Crydom)
  • SA70 - Transient Voltage Suppressors (Microsemi)
  • SA70 - Transient Voltage Suppressors (Crownpo)
  • SA70 - TRANSIENT VOLTAGE SUPPRESSOR (GME)
  • SA70 - GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR (SEMITECH)
  • SA70 - TRANSIENT VOLTAGE SUPPRESSOR (DC COMPONENTS)
  • SA70 - 500W TRANSIENT VOLTAGE SUPPRESSOR (Won-Top Electronics)
  • SA70 - TRANSZORB TRANSIENT VOLTAGE SUPPRESSOR (General Semiconductor)
Other Datasheets by Philips
  • SA7025 - Low-voltage 1GHz fractional-N synthesizer
  • SA7026 - 1.3GHz low voltage fractional-N dual frequency synthesizer
  • SA701 - Divide by: 128/129-64/65 dual modulus low power ECL prescaler
  • SA7016 - 1.3GHz low voltage fractional-N synthesizer
  • SA741C - General purpose operational amplifier

Full PDF Text Transcription

Click to expand full text
Philips Semiconductors RF Communications Products Product specification Divide by: 64/65/72 triple modulus low power ECL prescaler SA702 DESCRIPTION The SA702 triple modulus (Divide By 64/65/72) low power ECL prescaler is used in synthesizer systems to achieve low phase lock time, broad operating range, high reference frequency and small frequency step sizes. The minimum supply voltage is 2.7V and is compatible with the CMOS UMA1005 synthesizer from Philips and other logic circuits. The low supply current allows application in battery operated low-power equipment. Maximum input signal frequency is 1.1GHz for cellular and other land mobile applications. There is no lower frequency limit due to a fully static design. The circuit is implemented in ECL technology on the QUBiC process.
Published: |