Datasheet4U Logo Datasheet4U.com

SAA3004 - Remote control transmitter

Description

The SAA3004 transmitter IC is designed for infrared remote control systems.

It has a total of 448 commands which are divided into 7 sub-system groups with 64 commands each.

The sub-system code may be selected by a press button, a slider switch or hard wired.

Features

  • Flashed or modulated transmission.
  • 7 sub-system addresses.
  • Up to 64 commands per sub-system address.
  • High-current remote output at VDD = 6 V (.
  • IOH = 40 mA).
  • Low number of additional components.
  • Key release detection by toggle bits.
  • Very low stand.
  • by current (< 2 µA).
  • Operational current < 2 mA at 6 V supply.
  • Wide supply voltage range (4 to 11 V).
  • Ceramic resonator controlled frequency (typ.

📥 Download Datasheet

Datasheet preview – SAA3004

📁 Similar Datasheet

  • SAA3006 - Low Voltage Infrared Remote Control Transmitter (Signetics)
  • SAA3007 - INFRARED REMOTE CONTROL TRANSMITTER (NXP)
  • SAA3009 - (SAA3009 / SAA3049) Infrared Remote Control Decoders (ETC)
  • SAA3028 - Infrared Remote Control Transcoder (ETC)
  • SAA3049 - (SAA3009 / SAA3049) Infrared Remote Control Decoders (ETC)
  • SAA32M8 - DDR2 SDRAM (SpecTek)
  • SAA-311100 - Single-Mode FC D-Shape ADAPTOR supplied (Seiko Instruments Inc)
  • SAA-C505CA-4RC - 8-bit Single-Chip Microcontroller (Bare Die Delivery) (Infineon Technologies AG)
  • SAA-C505CA-LC - 8-bit Single-Chip Microcontroller (Bare Die Delivery) (Infineon Technologies AG)
  • SAA-XC866 - 8-Bit Single-Chip Microcontroller (Infineon)
Other Datasheets by Philips
  • SAA3008 - Infrared remote control transmitter RECS 80 low voltage
  • SAA3010 - Infrared remote control transmitter RC-5
  • SAA3027 - INFRARED REMOTE CONTROL TRANSMITTER
  • SAA3049 - Infrared remote control decoder
  • SAA3049A - Infrared remote control decoder
  • SAA3323 - Drive processor for DCC systems
  • SAA3500H - Digital audio broadcast channel decoder
  • SAA1027 - STEPPER MOTOR DRIVER

Full PDF Text Transcription

Click to expand full text
INTEGRATED CIRCUITS DATA SHEET SAA3004 Remote control transmitter Product specification File under Integrated Circuits, IC02 August 1982 Philips Semiconductors Product specification Remote control transmitter GENERAL DESCRIPTION SAA3004 The SAA3004 transmitter IC is designed for infrared remote control systems. It has a total of 448 commands which are divided into 7 sub-system groups with 64 commands each. The sub-system code may be selected by a press button, a slider switch or hard wired. The SAA3004 generates the pattern for driving the output stage. These patterns are pulse distance coded. The pulses are infrared flashes or modulated. The transmission mode is defined in conjunction with the sub-system address.
Published: |