SCN2681 Datasheet | Philips Semiconductors

DESCRIPTION The Philips Semiconductors SCN2681 Dual Universal Asynchronous Receiver/Transmitter (DUART) is a single-chip MOS-LSI munications device that provides two independent full-duplex asynchronous receiver/transmitter channels in a single package. It interfaces directly with microprocessors and may be used in a polled or interrupt driven system. The operating mode and data format of each channel can be programmed independently. Additionally, each receiver and transmitter can select its operating speed as one of eighteen fixed baud rates, a 16X clock derived from a programmable counter/timer, or an external 1X or 16X clock. The baud rate generator and counter/timer can operate directly from a crystal or from external clock inputs. The ability to independently program the operating speed of the receiver and transmitter make the DUART particularly attractive for dual-speed channel applications such as clustered terminal systems. Each receiver is quadruply buffered to minimize the potential of receiver over-run or to reduce interrupt overhead in interrupt driven systems. In addition, a flow control capability is provided to disable a remote DUART transmitter when the buffer of the receiving device is full. Also provided on the SCN2681 are a multipurpose 7-bit input port and a multipurpose 8-bit output port. These can be used as general purpose I/O ports or can be assigned specific functions (such as clock inputs or status/interrupt outputs) under program control. The SCN2681 is available in three package versions: 40-pin and 28- pin, both 0.6” wide DIPs; a pact 24-pin 0.4” wide DIP; and a 44-pin PLCC. - 16-bit programmable Counter/Timer - Non-standard rates to 115.2Kb - One user-defined rate derived from programmable timer/counter - External 1X or 16X clock - Parity, framing, and overrun error detection - False start bit detection - Line break detection and generation - Programmable channel mode - Normal (full-duplex) - Automatic echo - Local loopback - Remote...