TDA8559T - Low-voltage stereo headphone amplifier

Philips

The TDA8559T by Philips is a Low-voltage stereo headphone amplifier. Below is the official datasheet preview.

Datasheet Details

Part number	TDA8559T
Manufacturer	Philips
File Size	259.53 KB
Description	Low-voltage stereo headphone amplifier
Datasheet	TDA8559T-Philips.pdf
Additional preview pages of the TDA8559T datasheet.

The TDA8559T is a stereo ampliﬁer that operates over a wide supply voltage range from 1.9 V to 30 V and consumes a very low quiescent current.

I Operating voltage from 1.9 V to 30 V I Very low quiescent current I Low distortion I Few external components I Differential inputs I Usable as a mono ampliﬁer in Bridge-Tied Load (BTL) or stereo Single-Ended (SE) I Single-ended mode without loudspeaker capacitor I Mute and Standby mode I Short-circuit proof to ground, to supply voltage (< 10 V) and across load I No switch.

📁 TDA8559T Similar Datasheet

TDA8559 - Low-voltage stereo headphone amplifier (NXP)
TDA8551 - 1 W BTL audio amplifier with digital volume control (NXP)
TDA8552T - 2 x 1.4 W BTL audio amplifiers with digital volume control and headphone sensing (NXP)
TDA8552TS - 2 x 1.4 W BTL audio amplifiers with digital volume control and headphone sensing (NXP)
TDA8501 - PAL/NTSC encoder (NXP)
TDA8505 - SECAM encoder (NXP)
TDA8510J - 26 W BTL and 2 x 13 W SE power amplifiers (NXP)
TDA8511J - 4 x 13 W single-ended power amplifiers (NXP)

Other Datasheets by Philips

TDA8577 - Dual common-mode rejection differential line receiver
TDA8588AJ - Power Amplifier and Multiple Voltage Regulator
TDA8588BJ - Power Amplifier and Multiple Voltage Regulator
TDA8588J - Power Amplifier and Multiple Voltage Regulator
TDA8589BJ - I2C Bus Controlled 4 x 45 Watt Power Amplifier and Multiple Voltage Regulator
TDA8060ATS - Satellite ZERO-IF QPSK down-converter

Published: Mar 24, 2017 |