RC02 Datasheet | Phycomp

FEATURES œ Low assembly costs œ High ponent and equipment reliability œ Excellent performance at high frequency, especially the RC32. œ TC 50 in thick film technology œ plete precision SMD family. APPLICATIONS œ All general purpose applications. QUICK REFERENCE DATA VALUE DESCRIPTION RC02H Size code Resistance range Resistance tolerance and E-series Temperature coefficient; note 1: 1 W ˆ R ˆ 10 W 10 W < R ˆ 10 MW Maximum dissipation at Tamb = 70 •C Maximum permissible voltage Climatic category (IEC 60068) Basic specification Note 1. All TC values should be multiplied by 10-6/K. ˆ 250 –250 ˆ–100 0.25 W 200 V (DC or RMS) ˆ–50 ˆ 250 –250 ˆ–100 0.125 W 150 V (DC or RMS) 55/155/56 IEC 60115-8 ˆ–50 1 W to 10 MW RC02G 90 W to 2.74 MW RC12H 1 W to 10 MW RC12G 90 W to 2.74 MW DESCRIPTION The resistors are constructed on a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste which is applied to the top surface of the substrate. The position of the paste is adjusted to give the approximate resistance required and the value is trimmed to within tolerance, by laser cutting of this resistive layer. RC02/12/22/32 1% The resistive layer is covered with a protective coat and printed with the resistance value (no printing on RC22H and RC32). Finally, the two external end terminations are added. For ease of soldering the outerlayer of these end terminations is a lead/tin alloy. RC22H 0603 (1608) 1 W to 10 MW RC32 0402 (1005) 1 W to 10 MW 1206 (3216) 0805 (2012) –1%; E24/E96 series ˆ 250 –250 ˆ–100 0.1 W 50 V (DC or RMS) ˆ 250 –250 ˆ–200 0.063 W 50 V (DC or RMS) 55/125/56 2002 Apr 09 Rev.9 Phyp Product specification Precision chip resistors sizes 1206, 0805, 0603 and 0402 ORDERING INFORMATION Table 1 Ordering code indicating type and packing ORDERING CODE 2322 ... TYPE 5000 units RC02H RC02G RC12H RC12G RC22H RC32 Jumper 0 W RC02H; note 1 RC12H; note 1 RC22H; note 2 Notes 1. The jumper has a...