QPI-10 - Hot-Swap SiP

General Description

The QPI-10 integrates a total hot-swap function with an EMI filter for V

I Chip applications.

The product aligns with the AdvancedTCATM PICMG3.0‚ require-ments for hot insertion and board level conducted noise limitations.

Key Features

📥 Download Datasheet

QPI-10 hot-swap sip by Picor - Datasheet Preview

Datasheet Details

Part number	QPI-10
Manufacturer	Picor
File Size	564.30 KB
Description	Hot-Swap SiP
Datasheet	QPI-10 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer

Other Datasheets by Picor

Part Number	Description
QPI-21	Active EMI Input Module
QPI-6	14 A Active EMI Filter SIP

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

® QPI-10 QUIETPOWER® AdvancedTCATM Hot-Swap SiP with V•I Chip EMI Filter Description The QPI-10 integrates a total hot-swap function with an EMI filter for V•I Chip applications. The product aligns with the AdvancedTCATM PICMG3.0‚ require-ments for hot insertion and board level conducted noise limitations. The EMI filter provides conducted common-mode (CM) and differential-mode (DM) noise attenuation from 150 kHz to 30 MHz. The QPI-10 is designed for use on a 48 or 60 Vdc bus (36 – 76 Vdc). The inrush current limit and circuit breaker are designed to satisfy the 200 W per board PICMG3.0‚ limit up to 70°C PCB temperature around the QPI-10. The under and overvoltage thresholds can be trimmed separately via the UVEN and OV inputs using external series resistors.