The PT4205 is a continuous conduction mode inductive step-down converter, designed for driving single or multiple serie connected LEDs efficiently from a voltage source higher than the total LED chain voltage.
Key Features
Simple low parts count Wide input voltage range: 5V to 30V Up to 1.2A output current Single pin on/off and brightness control using DC voltage or PWM Typical 3% output current accuracy Inherent open-circuit LED protection High efficiency (up to 97%) Hysteretic Control: No Compensation Adjustable Constant LED Current Soft over temperature protection ESOP8 package for large output power.
Full PDF Text Transcription for PT4205 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
PT4205. For precise diagrams, and layout, please refer to the original PDF.
PT4205 30V, 1.2A Step-down HB LED Driver GENERAL DESCRIPTION The PT4205 is a continuous conduction mode inductive step-down converter, designed for driving single or mult...
View more extracted text
ode inductive step-down converter, designed for driving single or multiple serie connected LEDs efficiently from a voltage source higher than the total LED chain voltage. The device operates from an input supply between 5V and 30V and provides an externally adjustable output current of up to 1.2A. Depending upon the supply voltage and external components, the PT4205can provide more than tens of watts of output power. The PT4205 includes the power switch and a high-side output current sensing circuit, which uses an external resistor to set the nominal average output current, and a dedicated DIM input accepts either a DC vol
PT4205 Datasheet
