900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Power Integrations

LNK364 Datasheet Preview

LNK364 Datasheet

(LNK362 - LNK364) Low Power Off-Line Switcher IC

No Preview Available !

LNK362-364
LinkSwitch-XT Family
Energy Efficient, Low Power Off-Line Switcher IC
Product Highlights
Optimized for Lowest System Cost
• Proprietary IC trimming and transformer construction
techniques enable Clampless™ designs with LNK362
for lower system cost, component count and higher
efficiency
• Fully integrated auto-restart for short-circuit and
open loop protection
• Self-biased supply – saves transformer auxiliary
winding and associated bias supply components
• Frequency jittering greatly reduces EMI
• Meets HV creepage requirements between DRAIN and
all other pins both on the PCB and at the package
• Lowest component count switcher solution
Features Superior to Linear/RCC
• Accurate hysteretic thermal shutdown protection –
automatic recovery improves field reliability
• Universal input range allows worldwide operation
• Simple ON/OFF control, no loop compensation
needed
• Eliminates bias winding – simpler, lower cost
transformer
• Very low component count – higher reliability and
single side printed circuit board
• Auto-restart reduces delivered power by 95% during
short-circuit and open loop fault conditions
• High bandwidth provides fast turn-on with no
overshoot and excellent transient load response
EcoSmart– Extremely Energy-Efficient
• Easily meets all global energy efficiency regulations
with no added components
• No-load consumption <300 mW without bias winding
at 265 VAC input (<50 mW with bias winding)
• ON/OFF control provides constant efficiency to very
light loads – ideal for mandatory CEC regulations
Applications
• Chargers/adapters for cell/cordless phones, PDAs,
digital cameras, MP3/portable audio players, and
shavers
• Supplies for appliances, industrial systems, and
metering
Description
LinkSwitch™-XT incorporates a 700 V power MOSFET,
oscillator, simple ON/OFF control scheme, a high-voltage
switched current source, frequency jittering, cycle-by-
+ DC +
Output
Wide Range
HV DC Input
LinkSwitch-XT
D LNK362
FB
BP
S
a) Clampless flyback converter with LNK362
+
PI-4086-081005
DC +
Output
Wide Range
HV DC Input
LinkSwitch-XT
D
LNK363-364
FB
BP
S
b) Flyback converter with LNK363/4
Figure 1. Typical Application with LinkSwitch-XT.
PI-4061-081005
Output Power Table(4)
Product3)
230 VAC ±15%
Adapter(1)
Open
Frame(2)
LNK362P/G/D 2.8 W 2.8 W
LNK363P/G/D 5 W
7.5 W
LNK364P/G/D 5.5 W
9W
85-265 VAC
Adapter(1)
Open
Frame(2)
2.6 W 2.6 W
3.7 W 4.7 W
4W 6W
Table 1. Output Power Table.
Notes:
1. Minimum continuous power in a typical non-ventilated enclosed
adapter measured at 50 °C ambient.
2. Minimum practical continuous power in an open frame design with
adequate heat sinking, measured at 50 °C ambient.
3. Packages: P: DIP-8B, G: SMD-8B, D: SO-8C. Please see Part
Ordering Information.
4. See Key Application Considerations section for complete description
of assumptions.
cycle current limit and thermal shutdown circuitry onto
a monolithic IC. The start-up and operating power are
derived directly from the DRAIN pin, eliminating the need
for a bias winding and associated circuitry.
www.power.com
May 2015




Power Integrations

LNK364 Datasheet Preview

LNK364 Datasheet

(LNK362 - LNK364) Low Power Off-Line Switcher IC

No Preview Available !

LNK362-364
BYPASS
(BP)
FAULT
PRESENT
AUTO-
RESTART
COUNTER
CLOCK
RESET
6.3 V
FEEDBACK
(FB)
VFB -VTH
JITTER
CLOCK
DCMAX
OSCILLATOR
REGULATOR
5.8 V
DRAIN
(D)
5.8 V
4.8 V
BYPASS PIN
UNDER-VOLTAGE
+
-
CURRENT LIMIT
COMPARATOR
+
- VILIMIT
THERMAL
SHUTDOWN
SQ
RQ
LEADING
EDGE
BLANKING
SOURCE
(S)
PI-4232-110205
Figure 2. Functional Block Diagram.
Pin Functional Description
DRAIN (D) Pin:
Power MOSFET drain connection. Provides internal
operating current for both start-up and steady-state
operation.
BYPASS (BP) Pin:
Connection point for a 0.1 µF external bypass capacitor
for the internally generated 5.8 V supply. If an external
bias winding is used, the current into the BP pin must not
exceed 1 mA.
FEEDBACK (FB) Pin:
During normal operation, switching of the power MOSFET
is controlled by this pin. MOSFET switching is disabled
when a current greater than 49 µA is delivered into this
pin.
SOURCE (S) Pin:
This pin is the power MOSFET source connection.
It is also the ground reference for the BYPASS and
FEEDBACK pins.
P Package (DIP-8B)
G Package (SMD-8B)
S1
S2
BP 3
FB 4
8S
7S
5D
Figure 3. Pin Configuration.
D Package (SO-8C)
BP 1
FB 2
D4
8S
7S
6S
5S
PI-7192-110413
2
Rev. F 05/15
www.power.com


Part Number LNK364
Description (LNK362 - LNK364) Low Power Off-Line Switcher IC
Maker Power Integrations
Total Page 16 Pages
PDF Download

LNK364 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 LNK3604 Low Power Off-Line Switcher IC
Power Integrations
2 LNK362 (LNK362 - LNK364) Low Power Off-Line Switcher IC
Power Integrations
3 LNK363 (LNK362 - LNK364) Low Power Off-Line Switcher IC
Power Integrations
4 LNK364 (LNK362 - LNK364) Low Power Off-Line Switcher IC
Power Integrations
5 LNK3694 Low Power Off-Line Switcher IC
Power Integrations
6 LNK3696 Low Power Off-Line Switcher IC
Power Integrations





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy