TNY284KG Datasheet | Power Integrations

TNY284-290 TinySwitch-4 Family Energy-Efficient, Off-Line Switcher with Line pensated Overload Power Product Highlights Lowest System Cost with Enhanced Flexibility - 725 V rated MOSFET - Increases BV de-rating margin - Line pensated overload power - no additional ponents - Dramatically reduces max overload variation over universal input voltage range - ±5% turn on UV threshold: line voltage sense with single external resistor - Simple ON/OFF control, no loop pensation needed - Selectable current limit through BP/M capacitor value - Higher current limit extends peak power or, in open frame applications, maximum continuous power - Lower current limit improves efficiency in enclosed adapters/ chargers - Allows optimum TinySwitch™-4 choice by swapping devices with no other circuit redesign - Tight I2f parameter tolerance reduces system cost - Maximizes MOSFET and magnetics utilization - ON-time extension - extends low-line regulation range/hold-up time to reduce input bulk capacitance - Self-biased: no bias winding or bias ponents - Frequency jittering reduces EMI filter costs - Pin-out simplifies heat sinking to the PCB - SOURCE pins are electrically quiet for low EMI Enhanced Safety and Reliability Features - Accurate hysteretic thermal shutdown protection with automatic recovery eliminates need for manual reset - Auto-restart delivers <3% of maximum power in short-circuit and open loop fault conditions - Output overvoltage shutdown with optional Zener - Fast AC reset with optional UV external resistor - Very low ponent count enhances reliability and enables single-sided printed circuit board layout - High bandwidth provides fast turn-on with no overshoot and excellent transient load response...