900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Pulse

PA4340.682NLT Datasheet Preview

PA4340.682NLT Datasheet

SMT Power Inductors

No Preview Available !

SMT Power Inductors
Molded Power Inductor - PA4340.XXXNLT AND PM4340.XXXNLT Series
Height: 3.0mm Max
Footprint: 6.0mm x 5.4mm Max
Current Rating: up to 23A
Inductance Range: 0.10uH to 33uH
Shielded construction and compact design
High current, low DCR, and high efficiency
Minimized acoustic noise and minimized leakage flux
200Vdc Isolation between terminal and core
Commercial6,7
(-40°C to 125°C)
PA4340.101NLT
PA4340.151NLT
PA4340.201NLT
PA4340.221NLT
PA4340.331NLT
PA4340.471NLT
PA4340.561NLT
PA4340.681NLT
PA4340.821NLT
PA4340.102NLT
PA4340.122NLT
PA4340.152NLT
PA4340.222NLT
PA4340.332NLT
PA4340.472NLT
PA4340.562NLT
PA4340.682NLT
PA4340.103NLT
PA4340.153NLT
PA4340.183NLT
PA4340.223NLT
PA4340.333NLT
Automotive6,7
(-55°C to 155°C)
PM4340.101NLT
PM4340.151NLT
PM4340.201NLT
PM4340.221NLT
PM4340.331NLT
PM4340.471NLT
PM4340.561NLT
PM4340.681NLT
PM4340.821NLT
PM4340.102NLT
PM4340.122NLT
PM4340.152NLT
PM4340.222NLT
PM4340.332NLT
PM4340.472NLT
PM4340.562NLT
PM4340.682NLT
PM4340.103NLT
PM4340.153NLT
PM4340.183NLT
PM4340.223NLT
PM4340.333NLT
Electrical Specifications @ 25°C - Operating Temperature -55°C to +125°C
Inductance5
100KHz, 1V
Rated
Current
TYP.
DC Resistance
MAX.
uH±20%
0.10*
A m
23 2.5
m
3.0
0.15* 18 2.3
2.7
0.20* 16 2.6
3.2
0.22* 15.5 3.7
0.33 14 4.3
0.47 12 6.4
0.56 10 8.0
0.68 8.5 10
0.82 8.0 11.5
1.0 7.0 13
1.2 6.5 14
1.5 6.0 16
2.2 5.5 25
3.3 5.0 32
4.7 4.6 50
5.6 4.25 55
6.8 4.0 68
10 2.75 110
15 2.1 165
18 2.0 195
22 1.9 220
33 1.6 380
4.4
5.0
7.4
10
12
13
14
16
25
35
38
53
63
76.2
128
190
230
250
440
Saturation
Current
A
27
30
25
21
18
16
15
14
12.5
11
11
10
9.0
8.0
6.0
4.5
4.3
3.5
2.6
2.3
1.7
1.6
1
power.pulseelectronics.com
P767. L (05/19) http://www.power.pulseelectronics.com/contact




Pulse

PA4340.682NLT Datasheet Preview

PA4340.682NLT Datasheet

SMT Power Inductors

No Preview Available !

SMT Power Inductors
Molded Power Inductor - PA4340.XXXNLT AND PM4340.XXXNLT Series
Notes:
1. Actual temperature of the component during system operation (ambient plus
other cooling provisions all affect the part temperature. Part temperature should be
temperature rise) must be within the standard operating range.
verified in the end application.
2. The saturation current is the current at which the initial inductance drops approxi- 5. Please note that the inductance tolerance of all parts are ±20% except .101NLT, .151NLT,
mately 30% at the stated ambient temperature. This current is determined by placing
.201NLT and .221NLT which are ±30%.
the compnent in the specified ambient environment and applying a short duration 6. Parts shown in bold are standard catalog parts and are available through sample
pulse current (to eliminate self-heating effect) to the component.
stock and distribution. Parts in lighter font are available but are not necessarily held
3. The rated current is the DC current required to raise the component temperature by
in sample stock or distribution and lead times may be longer. Please contact Pulse
approximately 40�C. Take note that the components’ performanc varies depending
for availablity.
on the system condition. It is suggested that the component be tested at the system 7. Both the PA4340.XXXNLT and PM4340.XXXNLT are AEC-Q200 qualified parts. The
level, to verify the temperature rise of the component during system operation.
PM4340.XXXNLT have full automotive IATF16949 certification. The PM4340.XXXNLT
4. The part temperature (ambient+temp rise) should not exceed 125�C under worst
mechanical dimensions are 100% tested in production but do not necessarily meet a
case operating conditions. Circuit design, PCB trace size and thickness, airflow and
product capability index (Cpk) >1.33 and therefore may not strictly conform to PPAP.
PA4340/ PM4340
Mechanical
Final Layout
SUGGESTED PAD LAYOUT
Series A B C D E F G H
PA4340/PM4340
6.0 MAX
5.4 MAX
3.0 MAX
(1.5)
3.5 MAX
(1.8)
(2.0)
(2.5)
All Dimensions in mm.
TAPE & REEL INFO
WA
K0 P1
Direction of tape
G
SURFACE MOUNTING TYPE, REEL/TAPE LIST
REEL SIZE (mm)
TAPE SIZE (mm)
A G P1 W K0
PA4340/PM4340 Ø330 12 8 12 3.3
QTY
PCS/REEL
2000
2
power.pulseelectronics.com
P767. L (05/19) http://www.power.pulseelectronics.com/contact


Part Number PA4340.682NLT
Description SMT Power Inductors
Maker Pulse
PDF Download

PA4340.682NLT Datasheet PDF






Similar Datasheet

1 PA4340.682NLT SMT Power Inductors
Pulse





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy