900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Pulse

PA4341.472NLT Datasheet Preview

PA4341.472NLT Datasheet

SMT Power Inductors

No Preview Available !

SMT Power Inductors
High Current Molded Power Inductor - PA4341.XXXNLT & PM4341.XXXNLT
Height: 3.0mm Max
Footprint: 7.6mm x 6.9mm Max
Current Rating: up to 32.5A
Inductance Range: 0.1uH to 47.0uH
Shielded construction and compact design
High current, low DCR, and high efficiency
Minimized acoustic noise and minimized leakage flux
200Vdc Isolation between terminal and core
Commercial6,7
PA4341.101NLT
PA4341.151NLT
PA4341.161NLT
PA4341.201NLT
PA4341.221NLT
PA4341.301NLT
PA4341.331NLT
PA4341.361NLT
PA4341.471NLT
PA4341.561NLT
PA4341.601NLT
PA4341.681NLT
PA4341.751NLT
PA4341.821NLT
PA4341.102NLT
PA4341.122NLT
PA4341.152NLT
PA4341.182NLT
PA4341.202NLT
PA4341.222NLT
PA4341.252NLT
PA4341.332NLT
PA4341.472NLT
1
Automotive6,7
PM4341.101NLT
PM4341.151NLT
PM4341.161NLT
PM4341.201NLT
PM4341.221NLT
PM4341.301NLT
PM4341.331NLT
PM4341.361NLT
PM4341.471NLT
PM4341.561NLT
PM4341.601NLT
PM4341.681NLT
PM4341.751NLT
PM4341.821NLT
PM4341.102NLT
PM4341.122NLT
PM4341.152NLT
PM4341.182NLT
PM4341.202NLT
PM4341.222NLT
PM4341.252NLT
PM4341.332NLT
PM4341.472NLT
Electrical Specifications @ 25°C - Operating Temperature -55°C to +125°C
Inductance5
100KHz, 1V
Rated
Current
DC Resistance
TYP. MAX.
(uH ±20%) A mm
0.10* 32.5 1.2 1.7
0.15* 27 1.5 1.9
0.16* 27 1.5 1.9
0.20* 24 1.8 2.5
0.22* 23 2.1 2.8
0.30 21 3.2 3.8
0.33 20 3.5 3.9
0.36 19 3.6 4.2
0.47 17.5 4.0 4.2
0.56 16.5 4.7 5.0
0.60 16 4.7 5.2
0.68 15.5 4.8 5.5
0.75 14.5 5.5 6.6
0.82 13 6.7 8.0
1.0 11 8.3 10
1.2 10 10 12
1.5 9.0 13 15
1.8 8.5 14 17
2.0 8.2 16 19
2.2 8.0 18 20
2.5 7.0 20 22
3.3 6.0 28 30
4.7 5.5 37 40
Saturation
Current
A
60
45
45
41
40
35
32
32
26
25.5
25.5
25
24.5
24
22
20
18
16
15
14
13
13.5
10
power.pulseelectronics.com P768. M (04/19) http://www.power.pulseelectronics.com/contact




Pulse

PA4341.472NLT Datasheet Preview

PA4341.472NLT Datasheet

SMT Power Inductors

No Preview Available !

SMT Power Inductors
High Current Molded Power Inductor - PA4341.XXXNLT & PM4341.XXXNLT
Commercial6,7
PA4341.562NLT
PA4341.682NLT
PA4341.822NLT
PA4341.103NLT
PA4341.123NLT
PA4341.153NLT
PA4341.223NLT
PA4341.333NLT
PA4341.473NLT
Automotive6,7
PM4341.562NLT
PM4341.682NLT
PM4341.822NLT
PM4341.103NLT
PM4341.123NLT
PM4341.153NLT
PM4341.223NLT
PM4341.333NLT
PM4341.473NLT
Electrical Specifications @ 25°C - Operating Temperature -55°C to +125°C
Inductance5
100KHz, 1V
Rated
Current
DC Resistance
TYP. MAX.
(uH ±20%) A mm
5.6 5.0 43 48
6.8 4.5 54 60
8.2 4.0 64 68
10 3.5 75 85
12 3.3 81 93
15 3.0 107 123
22 2.0 165 190
33 2.0 200 240
47 1.75 302 363
Saturation
Current
A
9.0
8.0
7.5
6.0
5.5
4.0
3.5
2.5
2.0
Notes:
1. Actual temperature of the component during system operation (ambient plus
temperature rise) must be within the standard operating range.
2. The saturation current is the current at which the initial inductance drops
approximately 30% at the stated ambient temperature. This current is determined
by placing the compnent in the specified ambient environment and applying a short
duration pulse current (to eliminate self-heating effect) to the component.
3. The rated current is the DC current required to raise the component temperature by
approximately 40C. Take note that the components’ performanc varies depending
on the system condition. It is suggested that the component be tested at the system
level, to verify the temperature rise of the component during system operation.
4. The part temperature (ambient+temp rise) should not exceed 125C under worst
case operating conditions. Circuit design, PCB trace size and thickness, airflow and
other cooling provisions all affect the part temperature. Part temperature should be
verified in the end application.
5. Please note that the inductance tolerance of all parts are ±20%, except .101NLT, .151NLT
, .161NLT, .201NLT, and .221NLT which are ±30%.
6. Parts shown in bold are standard catalog parts and are available through sample
stock and distribution. Parts in lighter font are available but are not necessarily held
in sample stock or distribution and lead times may be longer. Please contact Pulse
for availablity.
7. The PA4341.XXXNLT and PM4341.XXXNLT are both AEC-Q200 qualified. The PM4341.
XXXNLT part numbers are also IATF16949 certified. The mechanical dimensions are
100% tested in production but do not necessarily meet a product capability index
(Cpk) 1.33 and therefore the PM4341.XXXNLT may not strictly conform to PPAP.
Mechanical
PA4341.XXXNLT and PM4341.XXXNLT
Series
PA4341/PM4341
All Dimensions in mm.
2
A B C D E F GHK
7.6 MAX
6.9 MAX
3.0 MAX
(3.0)
(3.7)
(3.5) (2.95) (2.5) (0~0.22)
power.pulseelectronics.com P768. M (04/19) http://www.power.pulseelectronics.com/contact


Part Number PA4341.472NLT
Description SMT Power Inductors
Maker Pulse
PDF Download

PA4341.472NLT Datasheet PDF






Similar Datasheet

1 PA4341.472NLT SMT Power Inductors
Pulse





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy