Datasheet4U Logo Datasheet4U.com

RE46C102 - CMOS Dual H-Bridge Driver

Description

The RE46C102 is a dual H-bridge driver with 35mA drive current and 16V VBB maximum driver supply voltage.

A separate low-side driver ground connection, Vss, is provided for current monitoring of each H-bridge driver.

Features

  • Typical Quiescent Current < 1uA Output Current of 35mA Output Voltage to 16V Internal Clamp Diodes Available in Standard Packaging or RoHS compliant Pb free packaging Pin Configuration 16 Lead Plastic DIP VBB.

📥 Download Datasheet

Datasheet Details

Part number RE46C102
Manufacturer R & E International
File Size 61.75 KB
Description CMOS Dual H-Bridge Driver
Datasheet download datasheet RE46C102 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RE46C100 Piezoelectric Horn Driver Microchip
RE46C101 Piezoelectric Horn Driver and LED Driver ETC
RE46C122 CMOS Ionization Smoke Detector ASIC Microchip
RE46C152 CMOS Ionization Smoke Detector ASIC Microchip Technology
RE46C162 CMOS Ionization Smoke Detector ASIC Microchip Technology

Other Datasheets by R & E International

Part Number Description
RE46C100 Piezoelectric Horn Driver Circuit
RE46C104 Piezoelectric Horn Driver and Voltage Converter
RE46C105 Piezoelectric Horn Driver
RE46C107 DC to DC Converter
RE46C108 Piezoelectric Horn Driver and Voltage Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com R&E International RE46C102 CMOS Dual H-Bridge Driver Product Specification General Description The RE46C102 is a dual H-bridge driver with 35mA drive current and 16V VBB maximum driver supply voltage. A separate low-side driver ground connection, Vss, is provided for current monitoring of each H-bridge driver. Each driver has two control inputs: ENABLE which enables the high-side drivers and therefore connects the driver supply to the motor output. This input can be used for pulse-width modulation. PHASE which is used to reverse the motor polarity. All control inputs are CMOS and TTL compatible and the logic section operates at Vdd=5V.
Published: |