Datasheet4U Logo Datasheet4U.com

RE46C121 - CMOS Ionization Smoke Detector ASIC

Description

The RE46C121 is low power CMOS ionization type smoke detector IC.

Features

  • for an ionization type smoke detector. An internal oscillator strobes power to the smoke detection circuitry for 10.5mS every 1.66 seconds to keep standby current to a minimum. A check for a low battery condition is performed every 40 seconds when in standby. The temporal horn pattern supports the NFPA 72 emergency evacuation signal. An interconnect pin allows multiple detectors to be connected such that when one unit alarms all units will sound. Although this device was designed for smoke detec.

📥 Download Datasheet

Datasheet Details

Part number RE46C121
Manufacturer R & E International
File Size 196.78 KB
Description CMOS Ionization Smoke Detector ASIC
Datasheet download datasheet RE46C121 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RE46C122 CMOS Ionization Smoke Detector ASIC Microchip
RE46C100 Piezoelectric Horn Driver Microchip
RE46C101 Piezoelectric Horn Driver and LED Driver ETC
RE46C152 CMOS Ionization Smoke Detector ASIC Microchip Technology
RE46C162 CMOS Ionization Smoke Detector ASIC Microchip Technology

Other Datasheets by R & E International

Part Number Description
RE46C120 CMOS Ionization Smoke Detector ASIC
RE46C126 CMOS Ionization Smoke Detector ASIC
RE46C127 CMOS Ionization Smoke Detector ASIC
RE46C128 CMOS Ionization Smoke Detector ASIC
RE46C129 CMOS Ionization Smoke Detector ASIC

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com R&E International RE46C121 CMOS Ionization Smoke Detector ASIC with Interconnect Product Specification General Description The RE46C121 is low power CMOS ionization type smoke detector IC. With few external components this circuit will provide all the required features for an ionization type smoke detector. An internal oscillator strobes power to the smoke detection circuitry for 10.5mS every 1.66 seconds to keep standby current to a minimum. A check for a low battery condition is performed every 40 seconds when in standby. The temporal horn pattern supports the NFPA 72 emergency evacuation signal. An interconnect pin allows multiple detectors to be connected such that when one unit alarms all units will sound.
Published: |