THICK FILM CHIP RESISTORS AND JUMPERS
RESISTORSCAPACITORSCOILSDELAY LINES
MC SERIES 50mW (0201) to 3W (2040)
ZC SERIES Zero-ohm chip (1A - 25A)
RoHS
(Term.W) (Term.Q)
t
L
T
W
r Industry’s widest selection & lowest prices-
0.1W to 22M, 50mW to 3W, 0.25% to 5%, TC’s to 50ppm
r 0402, 0603, 0805, 1206 sizes heavily stocked in 1% & 5%
(other sizes available from stock in many popular values)
r Option V: +175° operating temperature
r Option U: User-trimmable chips
r Option P: Increased pulse capability
r Military screening, custom values & TC, microwave design, etc.
RCD’s Series MC resistors utilize precision thick film technology
offering inherently low inductance, exceptional reliability and superior
performance. Heavy plating with NO LEACHTM nickel barrier assures
superb solderability and long shelf life. State-of-the-art production line
enables the industry’s most precise accuracies (0.25% & 50ppm!)
thereby replacing more costly thin-film chips in many applications.
RCD offers low cost offshore assembly of SM and leaded PCB’s (refer
to RCD’s Assembly Services p.114 for more information).
RCD Type Wattage
MC, ZC Rating1
0201
.05W
0402
Stock item
0603
Stock item
0805
Stock item
1206
Stock item
1206B
1210
.063W
.1W
.125W
.25W
.50W
.33W
2010
2512
2512B
2040
.75W
1.0W
2.0W
2.0/3.0
Std TC2
ppm/°C,
typ.
100
200
400
100
200
400
100
200
400
100
200
400
100
200
400
100
200
400
100
200
400
100
200
400
100
200
400
Resis. Range Standard Resis. Range
±0.5% Tol2
±1% Tol2
10Wto 22KW
22.1K to 1MW
10W to 1MW
10W to 1MW
1W to 9.76W
10W to 1MW
10W to 1MW
10W to 1MW
10W to 1MW
10W to 1MW
10W to 1MW
1W to 9.76W
10W to 1MW
1.02M to 5.6M
0.1-9.76W, 1.02M-10M
10W to 1MW
1.02M to 5.6M
1W to 9.76W 1.02M-10M
10W to 1MW
1.02M to 5.6M
1W to 9.76W 1.02M-10M
10W to 1MW
1.02M to 5.6M
1W to 9.76W 1.02M-10M
10W to 1MW
1.02M to 5.6M
1W to 9.76W 1.02M-10M
10W to 1MW
Standard Resis.
Range ±5% Tol2
10W to 1MW
1- 9.1W ,1.1M-2.2M
10W to 1MW
1- 9.1W ,1.1M-4.7M
10W to 1MW
1- 9.1W ,1.1M-10M
10W to 5.6MW
0.1- 9.1W ,1.1M-10M
10W to 1MW
0.1- 9.1W ,1.1M-22M
10W to 1MW
0.1- 9.1W ,1.1M-22M
10W to 1MW
0.1- 9.1W ,1.1M-22M
10W to 1MW
0.1- 9.1W ,1.1M-22M
10W to 1MW
1- 9.1W
MC
Voltage
Rating2
25V
TYPE ZC
Jumper3
1 Amp Max
50mW Max.
Dimensions Inch [mm]
L
W
T
t
.024±.002 .012±.002 .010±.002 .006±.002
[0.6±.03] [.3±.03] [.25±.03] [.15±.05]
50V
1 Amp Max .040±.004 .020±.004 .014±.004 .010±.004
50mW Max. [1.00±.1] [.5±.1]
[.35±.1] 10 [.25±.1]
50V
1.5 Amp Max .061±.005 .031±.004 .016±.006 .010±.006
50mW Max. [1.55±.12]
[.8±.1] [.40±.15] [.25±.15]
150V
2 Amp Max. .079±.005 .050±.006 .020±.006 .016±.008
50mW Max. [2.0±.15] [1.25±.15] [.50±.15] [.4±.2]
200V
2 Amp Max. .126±.008 .061±.006 .024±.006 .020±.008
50mW Max. [3.2±.2] [1.55±.15] [.61±.15] [.51±.2]
200V
200V
(250V
Opt. P)
250V
( 350V
Opt. P)
350V
3 Amp Max. .126±.008 .098±.008 .024±.008 .020±.010
50mW Max. [3.2±.2] [2.5±.2]
[.6±.2]
[.5±.25]
3 Amp Max. .197±.008 .102±.008 .024±.008 .020±.010
50mW Max. [5.0±.2] [2.6±.2]
[.6±.2] [.50±.25]
4 Amp Max. .250±.01 .125±.010 .024±.008 026±.012
50mW Max. [6.35±.25] [3.2±.25]
[.6±.2]
[.65±.3]4
N/A
.201±.008 .402±.008 .024±.008 .055±.018
[5.1±.2] [10.2±.2] [.6±.2] [1.4±.46]
1 Operation at or near full rated power (especially >1W) involves consideration of mounting geometry (solder pad and trace area/thickness, etc.). Request FA2623 for suggested mounting pad layouts.
2 Extended resistance range available. Most sizes available down to 0.01W 1%. 3 Up to 25A available. 4 Dim. t on MC2512B is .094[2.4] maximum.
TYPICAL PERFORMANCE
Thermal Shock (-55° to +125°C)
Overload (2.5x W, 5S, NTE 2x rated V)
Low Temp. Operation (-55°C)
High Temp. Exposure (125°C, 100hrs)
Resistance to Solder Heat
Moisture Resistance
Load Life(1000 hrs.)
Operating Temp. (+175°C Opt. V)
Derating (above 70°C)
0.2% ΔR
1% ΔR
0.2% ΔR
0.5% ΔR
0.2% ΔR
0.5% ΔR
1.0% ΔR
-55 to +155°C
Derate W & V by 1.18%/°C
P/N DESIGNATION:
MC 1206 - 2210 - F T
RCD Type: MC or ZC
Chip Size: 0201 to 2040
Options: U, P, etc. (leave blank if std)
Resis. Code: 0.25% to 1% Tol: 3 signif. digits & multiplier
(R100= .1W, 1R00=1W, 10R0=10W, 1000=100W 1001=1KW)
5% Tol: 2 signif. digits & multiplier (R10=.1W, 1R0=1W, 100=10W,
101=100W 102=1KW). Leave blank on ZC zero-ohm chips.
Tolerance: J=5%, F=1%, D=0.5%, C=0.25% Leave blank on ZC
zero-ohm chips. Opt.U trimmable chips W=±15%, M=±20%, U=0 to -30%.
Packaging: B=Bulk, T=Tape & Reel
Optional TC: 50=50ppm, 101=100ppm, 201=200ppm (leave blank if std)
Termination: W = Lead-free (std), Q = Tin/Lead (leave blank if both acceptable)
PULSE WITHSTAND CHART (increased pulse levels avail.)
500
100
10
1
1uS
W
10uS
100uS
1mS
10mS
Pulse Duration
MC2512P
MC2010P
MC1210P
MC1206P
MC0805P
MC0603P
MC0402P
100mS
Pulse capability is dependent on res. value, waveform, repeti-
tion, etc. Chart is a general guide for Opt. P version, single or in-
frequent pulses, with peak voltage levels not exceeding 150V for
0402 & 0603 size, 300V for 0805, 400V for 1206 & 1210, 450V
for 2010 & 2512. Max pulse wattage for standard parts (w/o
Opt.P) is 50% less, max pulse voltage is 50V less. Increased
pulse levels available. For improved performance and reliability,
pulse derating factor is recommended (30-50% typ., refer to #R-
42). Verify selection by evaluating under worst-case conditions.
RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com
FA033H Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
16
