BRIDGE RECTIFIER
RoHS
ü
KBPC15005(W) Thru KBPC1510(W) 15.0 Amps
FEATURES
• UL Recognized
• Current 15 Amps
• Voltage Range 50V ~ 1000V
• Glass passivated chip junction
• High surge forward current capability
• KBPC available in 15A, 25A, 35A, 50A
• Electrically isolated metal case for
maximum heat dissipation
MECHANICAL DATA
• Mounted in the bridge encapsulation
• Mounting through hole for No. 10 screw
• Mounting Torque: recommend 5Kg • cm
• Polarity: As marked
METAL
1.13(28.8)
1.11(28.2)
.488(12.4)
.409(10.4)
Hole for
1.13(28.8)
No.10 Screw .681(17.3) 1.11(28.2)
.193" 4.9 diam..602(15.3)
Hole for
No.10 Screw
.193" 4.9 diam.
1.134(28.8)
1.110(28.2)
.751(19.1)
.673(17.1)
.751(19.1)
.673(17.1)
1.134(28.8)
.681(17.13.)110(28.2)
.602(15.3)
.751(19.1)
.673(17.1)
1.200
(30.5)MIN.
.598(15.2)
.519(13.2)
.087(2.4)DIA
.102(2.6)
.441(11.2)
.425(10.8)
.033(0.85)
.029(0.75)
.251(6.4)
.244(6.2)
.846
(21.5)MIN.
.441(11.2)
.425(10.8)
Suffix W
(For Wire Leads)
No Suffix
(For 0.25” Terminals)
Dimensions in inches and millimeters
MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS
(TA = 25°C Unless otherwise noted)
Parameter
Maximum Repetitive Peak Reverse Voltage
Symbol
VRRM
KBPC
005
50
KBPC
01
100
KBPC
02
200
KBPC
04
400
KBPC
06
600
KBPC
08
800
KBPC
10
1000
Unit
V
Maximum RMS Voltage
VRMS
35
70 140 280 420 560 700
V
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
@ Tc = 55°C (With Heat Sink)
Peak Forward Surge Current 8.3ms single Half Sine-
Wave Superimposed on Rated Load
(JEDEC Method)
Forward Voltage (Per Element) @ IF = 7.5A
I2 t Rating for fusing ( t < 8.3ms) (Note 1)
VDC
I O (AV)
I FSM
VFM
I2 t
50
100 200 400 600 800 1000
15
V
A
300 A
1.1 V
375
2
AS
Dielectric Strength (AC 1 minute)
Maximum DC Reverse Current
at rated DC Blocking Voltage
Typical Thermal Resistance (Note 2)
Operating Temperature Range
Vdis
I RRM
R 0JC
TJ
2.5
10
2.3
-55 ~ +150
KV
A
°C / W
°C
Storage Temperature Range
TSTG
-55 ~ +150
°C
Note: 1. Measured at non-repetitive, for greater than 1ms and less than 8.3ms.
2. Device mounted on 300mm x 300mm x 1.6mm Cu Plate Heatsink.
Page 1 of 2
RFE International • Tel:(949) 833-1988 • Fax:(949) 833-1788 • E-Mail Sales@rfeinc.com
?????
2013.05.30
