RDA1005L Datasheet DIGITAL CONTROLLED VARIABLE GAIN AMPLIFIER

Manufacturer: RF Micro Devices (now Qorvo)

RDA1005L digital controlled variable gain amplifier by RF Micro Devices (now Qorvo) - Datasheet Preview

Datasheet Details

Part number	RDA1005L
Manufacturer	RF Micro Devices (now Qorvo)
File Size	944.98 KB
Description	DIGITAL CONTROLLED VARIABLE GAIN AMPLIFIER
Datasheet	RDA1005L Datasheet

General Description

RFMD’s RDA1005L is a digitally controlled variable gain amplifier featuring high linearity over the entire gain control range with noise figure less than 6dB in its maximum gain state.

The gain of the 6-bit digital step attenuator is programmed with a serial mode control interface.

The RDA1005L is packaged in a small 5.2mm x 5.2mm leadless laminate MCM which contains plated through thermal vias for ultra-low thermal resistance.

Overview

RDA1005LDigital Controlled Variable Gain Amplifier 50MHz to 4000MHz, 6 Bit RDA1005L DIGITAL CONTROLLED VARIABLE GAIN AMPLIFIER 50MHZ TO 4000MHZ, 6 BIT Package: MCM, 32-Pin, 5.2mm x 5.

Key Features

Broadband 50MHz to 4000MHz Operation.
6-Bit Digital Step Attenuator.
Serial Mode Programming.
Gain = -13.5dB to +18dB (0.5dB Step Size).
High OIP3/P1dB = +36dB/20dBm.
Single +5V Supply.
Small 32-Pin, 5.2mm x 5.2mm, MCM (Footprint Compatible with 5mm x 5mm 32-Pin QFN).

More Datasheets from RF Micro Devices (now Qorvo)

Part Number	Description
RDA2032Z	50 MHz TO 1000 MHz DIGITAL VGA