Datasheet4U Logo Datasheet4U.com

RF2436 - TRANSMIT/RECEIVE SWITCH

Datasheet Summary

Description

The RF2436 is a very low-cost transmit/receive GaAs MESFET switch.

The device can handle power levels as high as +28dBm and spans a frequency range from DC to 2500MHz.

The switch will operate from power supply voltages as low as 1.5V and as high as 6V with a CMOS logic driver for the control input.

Features

  • Single Positive Power Supply.
  • Low Current Consumption.
  • 0.5dB Insertion Loss at 900MHz.
  • 24dB Crosstalk Isolation at 900MHz.
  • +27dBm Output P1dB RX OUT 1 GND 2 TX IN 3 5 ANT I/O 4 TX/RX Ordering Information RF2436 RF2436 PCBA Transmit/Receive Switch Fully Assembled Evaluation Board Functional Block Diagram RF Micro Devices, Inc. 7625 Thorndike Road Greensboro, NC 27409, USA Tel (336) 664 1233 Fax (336) 664 0454 http://www. rfmd. com Rev A2 010717.

📥 Download Datasheet

Datasheet preview – RF2436

Datasheet Details

Part number RF2436
Manufacturer RF Micro Devices
File Size 42.30 KB
Description TRANSMIT/RECEIVE SWITCH
Datasheet download datasheet RF2436 Datasheet
Additional preview pages of the RF2436 datasheet.

📁 Similar Datasheet

Other Datasheets by RF Micro Devices
  • RF2401 - Low Noise Amplifier / Mixer
  • RF2402 - UHF Quadrature Modulator
  • RF2411 - LOW NOISE AMPLIFIER/MIXER
  • RF2413 - GAIN CONTROLLED DUAL-CONVERSION QUADRATURE MODULATOR
  • RF2416 - DUAL-BAND 2.7V LOW NOISE AMPLIFIER
  • RF2418 - LOW CURRENT LNA/MIXER
  • RF2420 - PROGRAMMABLE ATTENUATOR
  • RF2421 - 10dB SWITCHED ATTENUATOR

Full PDF Text Transcription

Click to expand full text
RF2436 9 Typical Applications • Cordless Phones • Wireless Computer Peripherals • Wireless Security Systems • General Purpose RF Switching • Commercial and Consumer Systems TRANSMIT/RECEIVE SWITCH Product Description The RF2436 is a very low-cost transmit/receive GaAs MESFET switch. The device can handle power levels as high as +28dBm and spans a frequency range from DC to 2500MHz. The switch will operate from power supply voltages as low as 1.5V and as high as 6V with a CMOS logic driver for the control input. No negative voltage is required, and current consumption is very low. VSWR for the active channel (transmit or receive) is 1.1:1. The device is housed in a very small industry-standard SOT 5-lead plastic package. 1.60 + 0.01 0.400 1 0.15 0.05 2.90 + 0.10 0.950 2.80 + 0.
Published: |