RF3330PCBA Datasheet | RF Micro Devices

Features - Single 5V Positive Power Supply - 26d B Gain Range - 150MHz Bandwidth VCC 1 GND 2 VOUT 3 VOUTB 4 Biasing & AGC Control 8 VCC 7 VIN 6 VINB 5 VAGC - pact Package Ordering Information RF3330 RF3330 PCBA RF3330 PCBA IF Gain Controlled Amplifier Fully Assembled Evaluation Board - 75 Ω Fully Assembled Evaluation Board - 50 Ω Tel (336) 664 1233 Fax (336) 664 0454 http://.rfmd. Functional Block Diagram RF Micro Devices, Inc. 7628 Thorndike Road Greensboro, NC 27409, USA Rev A2 010820 3-1 LINEAR CATV AMPLIFIERS Product Description TEXT- RF3330 Absolute Maximum Ratings Parameter Supply Voltage Operating Ambient Temperature Storage Temperature Preliminary Rating 7 -40 to +85 -60 to +150 Unit V °C °C Caution! ESD sensitive device. RF Micro Devices believes the furnished information is correct and accurate at the time of this printing. However, RF Micro Devices reserves the right to make changes to its products without notice. RF Micro Devices does not assume responsibility for the use of the described product(s). Parameter Overall LINEAR CATV AMPLIFIERS Specification Min. Typ. Max. Unit Condition Typical performance is at TA =+25°C, VCC =5V. DC Specifications Supply Voltage Supply Current AGC Control Voltage AGC Input Impedance 4.75 0.5 10 150 33.0 34.0 8.0 5.0 18 5.25 25 3.3 V m A V MΩ MHz d B d B d Bm V(rms) d Bm V(rms) d Bm V(rms) d Bc d Bm V(rms) d Bm V(rms) n V/rt Hz n V/rt Hz Ω Ω kΩ p F VAGC =3.3V VAGC =0.5V While meeting distortion specification While meeting distortion specification Maximum Gain Output level=50d Bm V(rms); VAGC =3.3V Output level=50d Bm V(rms); VAGC =3.3V Output level=50d Bm V(rms); VAGC =0.5V 0.5V=Minimum Gain 3.3V=Maximum...