Datasheet4U Logo Datasheet4U.com

RFDA4005 - DIGITAL CONTROLLED VARIABLE GAIN AMPLIFIER

Description

Reference Designator Manufacturer Manufacturer's P/N RDA1005L with USB Evaluation Board 50MHz to 4000MHz, G=18dB, P1=19dBm, 6-BIT, DVGA CAP, 1000pF, 10%, 50V, X7R, 0402 PCB Itself U1 C2, C9-C10 Dynamic Details (DDI) Toronto RFMD Murata Electronics RDA1005L410(C) RFDA4005SB GRM155R71H102KA01E

Features

  • Broadband 50MHz to 4000MHz Operation.
  • 6-Bit Digital Step Attenuator.
  • Serial Mode Programming.
  • Gain = -13.5dB to +18dB (0.5dB Step Size).
  • High Output IP3/P1dB = +36dB/ 20dBm.
  • Single +5V Supply.
  • Small 32-Pin, 5.2mm x 5.2mm, MCM (Footprint Compatible with 5mm x 5mm, 32-Pin QFN).

📥 Download Datasheet

Datasheet preview – RFDA4005

Datasheet Details

Part number RFDA4005
Manufacturer RF Micro Devices
File Size 1.79 MB
Description DIGITAL CONTROLLED VARIABLE GAIN AMPLIFIER
Datasheet download datasheet RFDA4005 Datasheet
Additional preview pages of the RFDA4005 datasheet.
Other Datasheets by RF Micro Devices

Full PDF Text Transcription

Click to expand full text
RFDA4005 6-Bit, Digital Controlled Variable Gain Amplifier 50MHz to 4000MHz RFMD’s RFDA4005 is a digitally controlled variable gain amplifier featuring high linearity over the entire gain control range with noise figure less than 6dB in its maximum gain state. The gain of the 6-bit digital step attenuator is programmed with a serial mode control interface. The RFDA4005 is packaged in a small 5.2mm x 5.2mm leadless laminate MCM which contains plated through thermal vias for ultra-low thermal resistance. The footprint for this module is directly compatible with a 5mm x 5mm QFN. This module is easy to use with no external matching components required.
Published: |