900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






RF Micro Devices

RFOS5012 Datasheet Preview

RFOS5012 Datasheet

5MHz to 85MHz Si OPTICAL RECEIVER

No Preview Available !

RFOS501X
5MHz to
85MHz Si
Optical
Receiver
NOT FOR NEW DESIGNS
RFOS501X
5MHz to 85MHz Si OPTICAL RECEIVER
Package: SOT-115J
Product Description
The RFOS501X is a hybrid high dynamic range optical receiver module.
The module contains a single mode optical input suitable for wavelengths
from 1290nm to 1600nm, a terminal to monitor the PIN diode current
and an electrical output with an impedance of 75.
VBIAS
Optimum Technology
Matching® Applied
Optical
GaAs HBT
Input
GaAs MESFET
InGaP HBT
SiGe BiCMOS
Si BiCMOS
SiGe HBT
GaAs pHEMT
Si CMOS
Si BJT
Pin Detector
GaN HEMT
RF MEMS
Matching
Network
PP Amplifier
OUTPUT
Features
Superior Return Loss
Performance
Optimal Reliability
Very Low EINC
Standard CATV Outline
Excellent Flatness
Low Power Consumption
SC/APC or FC/APC Optical
Interface
Applications
5MHz to 85MHz CATV
Reverse Amplifier Systems
Parameter
Specification
Min. Typ. Max.
Unit
Condition
Overall
Responsivity
2900
3100
Bandwidth 5MHz to 85MHz; VB=12V; TMB=30°C;
ZL = 75
V/W =1310nm, f=85MHz
Slope Straight Line[1]
0.0
1.0 dB f=5MHz to 85MHz
Flatness of O/E Response[2]
<0.3
0.5 dB f=5MHz to 85MHz
Optical Input Return Loss
45
dB
Output Return Loss
17.0
dB f=5MHz to 85MHz
Equivalent Input Noise
1.8 2.2 pA/HZ f=10MHz to 85MHz
Spectral Sensitivity
0.8
A/W =(1310+-20)nm
0.90
A/W =(1550+-20)nm
Optical Wavelength
1290
1600
nm
Total Current Consumption (DC)
100 105 mA
1. Slope is defined as the difference between the O/E response at the start frequency and the O/E response at the stop frequency.
2. Measured peak to valley.
DS130415
RF MICRO DEVICES®, RFMD®, Optimum Technology Matching®, Enabling Wireless Connectivity™, PowerStar®, POLARIS™ TOTAL RADIO™ and UltimateBlue™ are trademarks of RFMD, LLC. BLUETOOTH is a trade-
mark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names, trademarks and registered trademarks are the property of their respective owners. ©2006, RF Micro Devices, Inc.
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
1 of 4




RF Micro Devices

RFOS5012 Datasheet Preview

RFOS5012 Datasheet

5MHz to 85MHz Si OPTICAL RECEIVER

No Preview Available !

RFOS501X
Absolute Maximum Ratings
Parameter
Frequency Range
Optical Input Power (continuous)
ESD Sensitivity (Human Body Model;
R=1.5k, C=100pF)
Storage Temperature
Operating Mounting Base Tempera-
ture
Rating
5 to 85
0
500
-40 to +85
-20 to +85
Unit
MHz
dBm
V
°C
°C
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute Maximum Rating conditions may
cause permanent damage to the device. Extended application of Absolute Maximum
Rating conditions to the device may reduce device reliability. Specified typical perfor-
mance or functional operation of the device under Absolute Maximum Rating condi-
tions is not implied.
RoHS status based on EUDirective2002/95/EC (at time of this document revision).
The information in this publication is believed to be accurate and reliable. However, no
responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any
infringement of patents, or other rights of third parties, resulting from its use. No
license is granted by implication or otherwise under any patent or patent rights of
RFMD. RFMD reserves the right to change component circuitry, recommended appli-
cation circuitry and specifications at any time without prior notice.
Handling: Fiberglass optical coupling: maximum tensile strength=5N, minimum bending radius=35mm.
Parameter
Specification
Min. Typ. Max.
Unit
Condition
Distortion data
Second order distortion[3]
-70.0
dBc fm=54.25MHz
Third order distortion[4]
-70.0
dBc fm=55.25MHz
3. The single second beat distortion (SSO) is measured using a two laser test. Each laser is modulated wiht a single tone at 13.3% OMI. The total optical
power into the DUT is -10dBm (0.1mW) f1=20.25MHz; f2=34.00MHz; measurement at f1+f2.
4. The single triple beat distortion (STB) is measured using a three laser test. Each laser is modulated with a single tone at 13.3% OMI. The total optical
power into the DUT is -10dBm (0.1mW). f1=76.25MHz; f2=64.25MHz; f3=85.25MHz; measurement at f1+f2-f3.
Cable Lengths and Connector Types
Type
RFOS5012
RFOS5013
Inches
33.4
33.4
Dimension A
Tolerance
mm
-4 to +0.5
848
-4 to +0.5
848
Tolerance
-102 to +13
-102 to +13
Optical Connector
Type
FC/APC
SC/APC
2 of 4
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
DS130415


Part Number RFOS5012
Description 5MHz to 85MHz Si OPTICAL RECEIVER
Maker RF Micro Devices
Total Page 4 Pages
PDF Download

RFOS5012 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 RFOS5012 5MHz to 85MHz Si OPTICAL RECEIVER
RF Micro Devices
2 RFOS5013 5MHz to 85MHz Si OPTICAL RECEIVER
RF Micro Devices





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy