900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






RF Micro Devices

RFRP3120 Datasheet Preview

RFRP3120 Datasheet

hybrid reverse amplifier

No Preview Available !

DRAFT
DRAFT
RFRP3120
5MHz to 300MHz 35dB Reverse Hybrid
(Low Current)
The RFRP3120 is a hybrid reverse amplifier. The part employs a
silicon die. It has extremely low distortion and superior return loss
performance. The part also provides optimal reliability with low
noise and is well suited for 5MHz to 300MHz CATV amplifiers for
reverse channel systems.
Package: SOT-115J
Features
Excellent Linearity
Superior Return Loss Performance
Extremely Low Distortion
Optimal Reliability
Low Noise
Unconditionally Stable Under All
Terminations
35.8dB Typical Gain at 300MHz
160mA Max. at 24VDC
Applications
Broadband/CATV
5MHz to 300MHz CATV Amplifier
For Reverse Channel Systems
Functional Block Diagram
Ordering Information
RFRP3120
Box with 50 pieces
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS130917
DRAFT DRAFTRF MICRO DEVICES® and RFMD® are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
1 of 3




RF Micro Devices

RFRP3120 Datasheet Preview

RFRP3120 Datasheet

hybrid reverse amplifier

No Preview Available !

DRAFT
RFRP3120
DRAFT
Absolute Maximum Ratings
Parameter
RF Input Voltage (single tone)
DC Supply Over-Voltage (5 minutes)
Storage Temperature
Operating Mounting Base Temperature
Rating
65
30
-40 to +100
-30 to +100
Unit
dBmV
V
°C
°C
Caution! ESD sensitive device.
RoHS (Restriction of Hazardous
Substances): Compliant per EU Directive
2011/65/EU.
Nominal Operating Parameters
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Parameter
Specification
Unit Condition
Min Typ Max
General Performance
VB = 24V; TMB = 30°C; ZS = ZL = 75
Operating Frequency Range
5 300 MHz
Power Gain
34.5 35.2 35.5
34.3 35.8
dB f = 5MHz
dB f = 300MHz
Slope [1]
-0.2 0.6 1.2 dB f = 5MHz to 300MHz
Flatness of Frequency Response
±0.4 dB f = 5MHz to 300MHz
Input Return Loss
-20 dB f = 5MHz to 250MHz
Input Return Loss
-16 dB f = 250MHz to 300MHz
Output Return Loss
-20 dB f = 5MHz to 250MHz
Output Return Loss
-16 dB f = 250MHz to 300MHz
Noise Figure
5.1 5.5 dB f = 300MHz
Total Current Consumption (DC)
150.0 158.0 160.0 mA
Distortion data 5MHz to 300MHz
VB = 24V; TMB = 30°C; ZS = ZL = 75
CTB
-70 dBc 7 ch. flat; VO = 50dBmV [2]
-62 -60 dBc 42 ch. flat; VO = 44dBmV [3]
XMOD
-63 dBc 7 ch. flat; VO = 50dBmV [2]
-60 -57 dBc 42 ch. flat; VO = 44dBmV [3]
CSO
-75 dBc 7 ch. flat; VO = 50dBmV [2]
-70 -62 dBc 42 ch. flat; VO = 44dBmV [3]
Notes:
1. The slope is defined as the difference between the gain at the start frequency and the gain at the stop frequency.
2. 7 channels, NTSC frequency raster: T7-T13 (7.0MHz to 43MHz), +50dBmV flat output level.
3. 42 channels, NTSC frequency raster: T7-T13 (7.0MHz to 43MHz), 2-6 (55.25MHz to 83.25MHz), A-W / 7-13 (121.25MHz to 295.25MHz), +44dBmV flat output
level.
Composite Second Order (CSO) - The CSO parameter (both sum and difference products) is defined by the NCTA. Composite Triple Beat (CTB) - The CTB parameter is
defined by the NCTA. Cross Modulation (XMOD) - Cross modulation (XMOD) is measured at baseband (selective voltmeter method), referenced to 100% modulation of the
carrier being tested.
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS130917
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
DRAFT DRAFTthird parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 3


Part Number RFRP3120
Description hybrid reverse amplifier
Maker RF Micro Devices
Total Page 3 Pages
PDF Download

RFRP3120 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 RFRP3120 hybrid reverse amplifier
RF Micro Devices





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy