Absolute Maximum Ratings
LNA Drain Voltage
LOA Drain Voltage
RF Input Power
LO Input Power
ESD Human Body Model
Nominal Operating Parameters
-40 to +85
-65 to +150
Caution! ESD sensitive device.
RFMD Green: RoHS compliant per EU
Directive 2011/65/EU, halogen free per
IEC 61249-2-21, <1000ppm each of
antimony trioxide in polymeric materials
and red phosphorus as a flame retardant,
and <2% antimony solder.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Min Typ Max
DC 4.0 GHz
LO Input Drive
NF (17.7GHz to 19.7GHz)
IIP3 6 dBm
LO Return Loss
RF Return Loss
2.8 to 4.5
ID 350 mA
NOTES: Measurements performed on part soldered on evaluation board with SMA connectors and IF ports connected to an external 90° Hybrid Combiner
and LO Power of +5dBm and at 25°C, unless otherwise stated.
IF = 2.5GHz, RF Power = -20dBm, IIP3 is measured with a 2-tone input of -23dBm power for each tone and Δf = 10MHz, Vd1 = 2.8V, Vd2 = 4V, Vd3
through Vd5 = 4.5V, MixerBias = 0V
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or email@example.com.
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 7