Datasheet4U Logo Datasheet4U.com

RFVC1836 - InGaP MMIC VCO

General Description

Description No internal connection.

VCO RF output at Fo/4.

Externally DC-blocked.

Key Features

  • Multiple Frequency Outputs.
  • Fo: 10.4GHz to 11.62GHz.
  • Fo/2: 5.20GHz to 5.80GHz.
  • Fo/4: 2.60GHz to 2.90GHz.
  • No External Resonator Required.
  • Integrated Frequency Divider.
  • Phase Noise: -113dBc/Hz at 100kHz Offset.
  • Flat Output Power Over Frequency Tuning Range 1.5V to 14.5V.
  • Fo: 8dBm.
  • Fo/2: 8dBm.
  • Fo/4: -2dBm.
  • Low Power Consumption.
  • 5V/280mA (Divider On).
  • 5V/220mA (Divider Off).
  • 32-Lead 5mm x 5mm Plastic Overmolded QFN Applicat.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
RFV10N50 10A/ 500V/ Fast Switching N-Channel Enhancement-Mode Power MOSFETs Intersil Corporation
RFV10N50BE 10A/ 500V/ Fast Switching N-Channel Enhancement-Mode Power MOSFETs Intersil Corporation
RFV12TG6S Super Fast Recovery Diode Rohm
RFV12TJ6S Super Fast Recovery Diode Rohm
RFV15TG6S Super Fast Recovery Diode Rohm

Other Datasheets by RF Micro Devices (now Qorvo)

Part Number Description
RFVC1831 InGaP MMIC VCO
RFVC1832 InGaP MMIC VCO
RFVC1832A InGaP MMIC VCO
RFVC1832B InGaP MMIC VCO
RFVC1833 InGaP MMIC VCO

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
RFVC1836 10.4GHz to 11.62GHz MMIC VCO with Fo/2 and Fo/4 Outputs RFMD's RFVC1836 is a 5V InGaP MMIC VCO with an integrated frequency divider providing additional Fo/2 and Fo/4 outputs. With an Fo frequency range of 10.4GHz to 11.62GHz its monolithic structure provides excellent temperature, shock, and vibration performance. Output power (Fo) is +8dBm and is flat across the tuning voltage range of 1.5V to 14.5V. Phase noise is typically -113dBc/Hz at 100kHz offset. The device operates from a low supply current of 280mA which can be further reduced to 220mA by disabling the divider functions if not required. The RFVC1836 is available in a low cost 5mm x 5mm surface mount plastic overmolded QFN outline.