SF2024D Datasheet | RF Monolithics

- - - - - Designed for SDARS Receiver IF Application Low Insertion Loss 3.8 X 3.8 X 1.2 mm Surface-Mount Case Differential Input and Output plies with Directive 2002/95/EC (Ro HS) Pb 467.751 MHz SAW Filter Value +10 30 -40 to +85 260°C for 30 s Absolute Maximum Ratings Rating Maximum Incident Power in Passband Max. DC voltage between any 2 terminals Storage Temperature Range Suitable for lead-free soldering - Max Soldering Profile Units d Bm VDC °C SM3838-8 Electrical Characteristics Characteristic Center Frequency Insertion Loss Amplitude Ripple (p-p) Sym f C IL fc-6.250 to fc-4.3925 MHz fc-4.3925 to fc-2.535 MHz fc-2.5350 to fc-0.025 MHz fc+0.025 to fc+2.535 MHz fc+2.5350 to fc+4.3925 MHz fc+4.3925 to fc+6.250 MHz Notes Min Typ 467.751 12 Max 467.798 13 2.0 2.0 2.0 2.0 2.0 2.0 Units MHz d B d B 1, 2 Pass bandwidth of -2.0d B centered at fc Pass bandwidth of -3 d B Low Side Attenuation between 455.751 to 457.251 MHz (fc-10.5 MHz) Low Side Attenuation F<455.751 MHz High Side Attenuation between 476.751 to 479.751 MHz (fc+9.0 MHz) High Side Attenuation F<479.751 MHz Temperature Coefficient of frequency Delay Ripple (p-p) fc-6.250 to fc-4.3925 MHz fc-4.3925 to fc-2.535 MHz fc-2.5350 to fc-0.025 MHz fc+0.025 to fc+2.535 MHz fc+2.5350 to fc+4.3925 MHz fc+4.3925 to fc+6.250 MHz Source Impedance Load Impedance Case Style Lid Symbolization (YY=year, WW=week, S=shift) See note 4 13.0 32 32 20 32 1, 2, 3 -18 100 100 120 120 100 100 MHz .Data Sheet.net/ d B ppm/K ns ZS ZL 6 150 Ω 150 Ω SM3838-8 3.8 x 3.8 mm Nominal Footprint 580 YWWS CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to 50 Ω and measured with 50 Ω network analyzer. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc. Rejection...