Overview: High-performance video signal Switcher Series
Video Drivers with Built-in Low Voltage operation Single Video Switchers High-performance System video Driver Series
Video Drivers with Built-in Input Selection SW
BH76330FVM, BH76331FVM, BH76360FV, BH76361FV High-performance video signal Switcher Series
Wide Band Low Voltage operation Single Video Switchers BH76332FVM, BH76333FVM, BH76362FV, BH76363FV No.09065EAT01 INDEX
Video Drivers with Built-in Low Voltage operation Single Video Switchers
BH76330FVM (3input 1output Video Switch)・・・・・・P2 BH76331FVM (3input 1output Video Switch)・・・・・・P2 BH76360FV (6input 1output Video Switch)・・・・・・P17 BH76361FV (6input 1output Video Switch)・・・・・・P17
Wide Band Low Voltage operation Single Video Switchers
BH76332FVM (3input 1output Video Switch)・・・・・・P2 BH76333FVM (3input 1output Video Switch)・・・・・・P2 BH76362FV (6input 1output Video Switch)・・・・・・P17 BH76363FV (6input 1output Video Switch)・・・・・・P17 www.rohm.com © 2009 ROHM Co., Ltd. All rights reserved. 1/32 2009.04 - Rev.A BH76330FVM, BH76331FVM, BH76360FV, BH76361FV, BH76332FVM, BH76333FVM, BH76362FV, BH76363FV Technical Note Line-up of products with built-in video amplifier and video driver
3-input, 1-output video switch
BH76330FVM, BH76331FVM, BH76332FVM, BH76333FVM ● General BH76330FVM, BH76331FVM, BH76332FVM, and BH76333FVM are video signal switching ICs, each with three inputs and one circuit input, which feature wide dynamic range and frequency response. Since these ICs can be used with low voltage starting at VCC = 2.8 V, they are applicable not only in stationary devices but also in mobile devices. This product line-up supports a broad range of input signals, depending on whether or not a 6-dB video amplifier and video driver are included and what combination of sync tip clamp type and bias (resistor termination) type inputs are used.