Datasheet4U Logo Datasheet4U.com

BM92A13MWV-Z - USB Type-C Power Delivery Controller

General Description

BM92A13 is a full function USB Type-C Power Delivery (PD) controller that supports USB Power Delivery using base-band communication.

It is compatible with USB Type-C Specification and USB Power Delivery specification.

Key Features

  • USB Type-C Specification compatible.
  • USB PD Specification compatible (BMC-PHY).
  • Connected the required initial voltage is 15V.
  • Request current depends on the far-end device.
  • Start of automatic power receiving without Ext-MCU.
  • Two channel power path control using N-channel MOSFET drivers with back flow prevention.
  • Type-C cable orientation detection.
  • Built-in VCONN Switch and VCONN controller.
  • Direct VBUS powered operation.
  • Initial Role is UFP mod.

📥 Download Datasheet

Datasheet Details

Part number BM92A13MWV-Z
Manufacturer ROHM
File Size 1.68 MB
Description USB Type-C Power Delivery Controller
Datasheet download datasheet BM92A13MWV-Z Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BM9209 300mA CMOS LDO BOOKLY
BM9230 600mA CMOS LDO Bookly
BM90 Bluetooth 3.0 Multi-Speaker Stereo Audio Module ISSC
BM9162 450mA Low Dropout Positive Voltage Regulator BOOKLY
BM9164 1A BiCMOS LDO BOOKLY

Other Datasheets by ROHM

Part Number Description
BM92A11MWV-Z USB Type-C Power Delivery Controller
BM92A12MWV-Z USB Type-C Power Delivery Controller
BM92A20MWV USB Type-C Power Delivery Controller
BM92A30MWV USB Type-C Power Delivery Controller
BM92A30MWV-Z USB Type-C Power Delivery Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Datasheet USB Type-C Power Delivery Controller BM92A13MWV-Z General Description BM92A13 is a full function USB Type-C Power Delivery (PD) controller that supports USB Power Delivery using base-band communication. It is compatible with USB Type-C Specification and USB Power Delivery specification. BM92A13 includes support for the PD policy engine and communicates with an Embedded Controller or the SoC via host interface. It supports SOP, SOP’ and SOP’’ signaling, allowing it to communicate with cable marker ICs, support alternate modes. Key Specifications  VBUS Voltage Range: 4.75V to 20V  Power Sink Voltage Range: 4.75V to 20V  Power Source Voltage Range: 4.75V to 5.5V  Power Consumption at Sleep Power: 0.