900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Rohm Semiconductor Electronic Components Datasheet

BP3596 Datasheet

Low Power Sub-1GHz Radio Module

No Preview Available !

ARIB STD-T108 standard
Low Power Sub-1GHz Radio Module
BP3596
Datasheet
Features
· Certificate with Japanese radio law.
· Interface : SPI, DIO
· Conform to International Standard IEEE802.15.4g · Frequency band used : 920.6MHz to 928MHz
· Low power consumption.
(Under development (750 to 1000MHz)
At transmitting (1mW sending) 14mA
module for Sub-GHz overseas in the
(20mW sending) 40mA
same type)
At receiving 18mA
· Utilizes a Lapis Semiconductor (a ROHM
On sleep 3µA
Group company) IC, enabling complete
· Transmission power : 1mW, 10mW, 20mW support
· Package size : 34.7mm×22.0mm×3.5mm
Dimensions(Unit : mm)
0.9TYP.
Absolute Maximum Ratings
Parameter
Power supply voltage
Digital input voltage
Digital output voltage
Digital input current
Digital ouput current
Operating temperature range
Storage temperature range
Symbol
VDD
VDIN
VDO
IDI
IDO
Topr
Tstg
Limits
0.3 to +3.6
0.3 to VDD to +0.3
0.3 to VDD to +0.3
10 to +10
8 to +8
30 to +80
30 to +80
Unit Remarks
V DC
V
V
mA
mA
°C
°C
φ2.2
4.45TYP.
4.45TYP.
11.0TYP.
22.0±0.5
φ2.2
2.6MAX.
3.5MAX.
Specification
Wireless standard
Frequency band used
Modulation method
Data rate
Tx power
Rx sensitivity
Frequency tolerance
Consumption current
(VDD=3.0V)
(data rate 100kbps)
HOST interface
It is based on ARIB STD-T108
920.6 to 928 MHz
2 value GFSK
100kbps (NRZ symbol)
In case of machester symbol is 1/2
1mW, 10mW, 20mW
103dBm (TYP.) (100kbps, BER<0.1%)
±20ppm or less
At transmitting : 14mA, 40mA (1mW/20mW)
At receiving : 18mA
On sleep : 3µA
Synchronous serial peripheral interface(SPI)
Sending and Receiving data·Interface(DIO, DCLK)
Block Chart
Terminal Table
Antenna Connector
Part No.MS-156C (Hirose Denki)
BP3596 Installation Connector
(Connector Receptable)
Part No.DF40C(2.0)-20DS-0.4V (51)
(Hirose Denki)
Customer Apparatus Side
Installation Connector (Header)
Part No.DF40C-20DP-0.4V (51)
(Hirose Denki)
Connector Terminal
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
No.
Terminal
Name
I/O
at reset
1 SCL
2 SDA
3 GND
4 GND
5 GND
6 GND
7 AVDD_MON
8 VDD
9 VDD
10 N.C.
11 RESETN
I
12 SDO
O/L
13 SINTN O/H
14 SCLK
I
15 SCEN
I
16 SDI
17 DIO
18 DCLK
I
O
I/O
I
I/O
Is
O
O
Is
Is
Is
I/O
O
19 D_MON
O
O
20 A_MON Hi-Z ORF
Active
Level
Functions
L
H or L
L
L
H or L
H
EEPROM Serial clock
EEPROM sending / receiving serial data
Ground
Ground
Ground
Ground
Regulator monitor terminal
Power supply 3V
Power supply 3V
None connection
"Reset
L : RESET, H : Normal"
sending SPI date
"receiving SPI Interrupt
L : notify, H : not notify"
receiving SPI clock
SPI chip enable
L : enable, H : disable
receiving SPI date
data Input / Output terminal
data clock
Digital monitor terminal
Function1 : (output clock (6MHz))
Function2 : output PLL Lock signal
Function : Output FIFO trigger
Analog monitor terminal
I/O Definition ORF : RF Output Terminal, I : Digital Input Terminal,
O : Digital Output Terminal, Is : Schmitt Trigger Input Terminal
1/1 2013.04 - Rev. B


Rohm Semiconductor Electronic Components Datasheet

BP3596 Datasheet

Low Power Sub-1GHz Radio Module

No Preview Available !

Notice
Notes
1) The information contained herein is subject to change without notice.
2) Before you use our Products, please contact our sales representative and verify the latest specifica-
tions :
3) Although ROHM is continuously working to improve product reliability and quality, semicon-
ductors can break down and malfunction due to various factors.
Therefore, in order to prevent personal injury or fire arising from failure, please take safety
measures such as complying with the derating characteristics, implementing redundant and
fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no
responsibility for any damages arising out of the use of our Poducts beyond the rating specified by
ROHM.
4) Examples of application circuits, circuit constants and any other information contained herein are
provided only to illustrate the standard usage and operations of the Products. The peripheral
conditions must be taken into account when designing circuits for mass production.
5) The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly,
any license to use or exercise intellectual property or other rights held by ROHM or any other
parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of
such technical information.
6) The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communi-
cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in
this document.
7) The Products specified in this document are not designed to be radiation tolerant.
8) For use of our Products in applications requiring a high degree of reliability (as exemplified
below), please contact and consult with a ROHM representative : transportation equipment (i.e.
cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety
equipment, medical systems, servers, solar cells, and power transmission systems.
9) Do not use our Products in applications requiring extremely high reliability, such as aerospace
equipment, nuclear power control systems, and submarine repeaters.
10) ROHM shall have no responsibility for any damages or injury arising from non-compliance with
the recommended usage conditions and specifications contained herein.
11) ROHM has used reasonable care to ensur the accuracy of the information contained in this
document. However, ROHM does not warrants that such information is error-free, and ROHM
shall have no responsibility for any damages arising from any inaccuracy or misprint of such
information.
12) Please use the Products in accordance with any applicable environmental laws and regulations,
such as the RoHS Directive. For more details, including RoHS compatibility, please contact a
ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting
non-compliance with any applicable laws or regulations.
13) When providing our Products and technologies contained in this document to other countries,
you must abide by the procedures and provisions stipulated in all applicable export laws and
regulations, including without limitation the US Export Administration Regulations and the Foreign
Exchange and Foreign Trade Act.
14) This document, in part or in whole, may not be reprinted or reproduced without prior consent of
ROHM.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2013 ROHM Co., Ltd. All rights reserved.
R1102A


Part Number BP3596
Description Low Power Sub-1GHz Radio Module
Maker ROHM
PDF Download

BP3596 Datasheet PDF






Similar Datasheet

1 BP3595 Built-in antenna IEEE802.11b/g/n (1x1) Wireless LAN Module
ROHM
2 BP3596 Low Power Sub-1GHz Radio Module
ROHM





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy