Datasheet4U Logo Datasheet4U.com

BU16501KS2 - LED Driver

General Description

BU16501KS2 is “Matrix LED Driver” that is the most suitable for Home Appliance.

It can control 8x16 (128 dot) LED Matrix by internal 8-channel PMOS SWs and 16-channel LED drivers.

It can control the brightness in each dot by the setting of the internal register.

Key Features

  • LED Matrix driver (8x16).
  • It has 8-channel PMOS SWs and 16-channel current drivers with 1/8 TDM timing driven sequentially.
  • Put ON/OFF (for every dot).
  • The current drivers can drive from 0 to 20.00mA current with “16” steps(for every dot).
  • The current drivers can drive maximum 42.5mA/Line (ISET=47kΩ).
  • 64 steps of the luminance control by PWM (common setting for all dots).
  • Interface.
  • SPI and I2C BUS FS mode (max 400 kHz) Compability.
  • For I2C mode, I.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
BU100 Silicon NPN Power Transistors Inchange Semiconductor
BU1006 Enhanced PowerBridge Rectifiers Vishay Siliconix
BU1006-E3 Bridge Rectifiers Vishay
BU1006-M3 Bridge Rectifiers Vishay
BU1006A Enhanced PowerBridge Rectifiers Vishay Siliconix

Other Datasheets by ROHM

Part Number Description
BU16006KV HDMI Switch ICs
BU16018KV HDMI Switch ICs
BU16024KV HDMI Switch ICs
BU16027KV HDMI Switch ICs
BU16UA3WNVX-TL FULL CMOS LDO Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Datasheet LED Driver with I2C Compatible and 3-wire Serial Interface for 8×16 LEDs in Dot Matrix BU16501KS2 General Description BU16501KS2 is “Matrix LED Driver” that is the most suitable for Home Appliance. It can control 8x16 (128 dot) LED Matrix by internal 8-channel PMOS SWs and 16-channel LED drivers. It can control the brightness in each dot by the setting of the internal register. It supports SPI and I2C interface. Features  LED Matrix driver (8x16)  It has 8-channel PMOS SWs and 16-channel current drivers with 1/8 TDM timing driven sequentially.  Put ON/OFF (for every dot)  The current drivers can drive from 0 to 20.00mA current with “16” steps(for every dot)  The current drivers can drive maximum 42.