RC1701HP-MSM Datasheet | Radiocrafts

Description The RC1701HP-MSM module is a fully integrated, autonomous sensor-enabled, pact surface mounted product that measures only 12.7 x 25.4 x 3.7 mm. The module includes interfaces and drivers for several sensors. Configurable signal processing features are also available. Messages can be sent regularly and/or when a certain condition triggers, such as a sensor value going above a defined threshold. This enables a very pact, integrated and efficient solution for wireless sensor measurements that offers minimal time to market and a minimum amount of coding. The modules are easily interfaced and are set up through an UART interface. Radiocrafts also provides sensor boards for testing and prototyping. Custom variants can be offered with custom functionalities. Details of interfaces and sensory setup is described in the RCxxxxxxx-MSM User Manual. The RC1701HP-MSM meets the EN137574:2013 Mode N and is pre-certified for operation under the European radio regulations. Applications - Wireless Sensor Networks - Wireless M-Bus - Internet of Things - Industrial remote sensing - Smart sensors for buildings and smart city - Telemetry stations Note: The number of LGA pads differ Features from photo, see page 8 for details - Sensor interfaces with support for mon sensors: Temperature, Humidity, Accelerometer, Voltage and others - Provides standard electrical interfaces for sensors: I2C, SPI, Analog, and Digital GPIOs - Provides built-in software drivers for mon sensors - Embedded Wireless M-Bus protocol supporting EN 13757-4:2013 and 2018 mode N - High power, long range (20 km Line-Of-Sight) - Industry leading Wireless M-Bus protocol stack - pletely shielded - 12.7 x 25.4 x 3.7 mm pact module for SMD mounting - No external ponents except antenna - 2.8 - 3.6 V supply voltage, ultra low power modes - Conforms with EU RED directive (EN 300 220, EN 301 489, EN 60950) ©2018 Radiocrafts AS RC1701HP-MSM Data Sheet (rev. 1.02) Page 1 of 16 Radiocrafts Embe...