Datasheet4U Logo Datasheet4U.com

ENT1 - 12.5kHz Channel VHF High Power TX

General Description

The ENT1 transmitter consists of a frequency modulated Voltage Controlled Temperature Controlled Crystal Oscillator (VCTCXO) feeding a frequency multiplier with two stage amplifier and RF filter.

Final Power Amplifier stage is factory pre-set to appropriate band power level.

Key Features

  • Conforms to EN 300 220-3 and EN 301 489-3 Standard frequency 169.406250MHz Other frequencies from 120MHz to 180MHz 12.5 kHz channel spacing Data rates up to 3kbps Usable range over 10km Fully screened Low power requirements www. DataSheet4U. com.

📥 Download Datasheet

Datasheet Details

Part number ENT1
Manufacturer Radiometrix
File Size 274.85 KB
Description 12.5kHz Channel VHF High Power TX
Datasheet download datasheet ENT1 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ENT1D-449-Y00064 Rotary Optical Encoder Bourns
ENT1D-467-Y00064 Rotary Optical Encoder Bourns
ENT1D-D16-L00256 Rotary Optical Encoder Bourns
ENT1D-D20-L00128 Rotary Optical Encoder Bourns
ENT1D-D20-L00256 Rotary Optical Encoder Bourns

Other Datasheets by Radiometrix

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
W E N Issue 1, 16 October 2007 Radiometrix Hartcran House, 231 Kenton Lane, Harrow, HA3 8RP, England Tel: +44 (0) 20 8909 9595, Fax: +44 (0) 20 8909 2233 ENT1 12.5 12.5kHz kHz Channel Channel VHF High Power TX The ENT1 transmitter modules offer a 100mW RF output VHF data link in Radiometrix SIL standard pin-out and footprint. This makes the ENT1 ideally suited to those low power applications where existing narrow band and wideband transmitters provide insufficient range. Together with the matching LMR1/RX1M receiver a oneway radio data link can be achieved over a distance up to 10km+ with suitable choice of data rate and antennas. Figure 1: ENTI –169.40625-3 Features • • • • • • • • Conforms to EN 300 220-3 and EN 301 489-3 Standard frequency 169.