©2008 Realtek Semiconductor Corp. All rights reserved. No part of this document may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means without the written permission of Realtek Semiconductor Corp.
Realtek provides this document “as is”, without warranty of any kind, neither expressed nor implied,
including, but not limited to, the particular purpose. Realtek may make improvements and/or changes in
this document or in the product described in this document at any time. This document could include
technical inaccuracies or typographical errors.
Realtek is a trademark of Realtek Semiconductor Corporation. Other names mentioned in this document
are trademarks/registered trademarks of their respective owners.
USING THIS DOCUMENT
This document is intended for the software engineer’s reference and provides detailed programming
Though every effort has been made to ensure that this document is current and accurate, more information
may have become available subsequent to the production of this guide. In that event, please contact your
Realtek representative for additional information that may help in the development process.
Revised Table 19, page 15.
Added section 8.5 LED and PHY Address Configuration, page 21.
Revised section 8.11 3.3V Power Supply and Voltage Conversion Circuit, page 25.
Added section 9.1.3 Power On Sequence, page 26.
Added section 9.1.4 PHY Reset Sequence, page 27.
Revised Table 32, page 28.
Removed RMII function.
Removed INTB function.
Added RTL8201E(L)-VB-GR version and features (RMII and INTB).
Single-Chip/Port 10/100 Fast Ethernet PHYceiver
with Auto MDIX
Track ID: JATR-1076-21 Rev. 1.3