©2017 Realtek Semiconductor Corp. All rights reserved. No part of this document may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means without the written permission of Realtek Semiconductor Corp.
l Realtek provides this document ‘as is’, without warranty of any kind. Realtek may make improvements
i and/or changes in this document or in the product described in this document at any time. This document
f o could include technical inaccuracies or typographical errors.
al d Realtek is a trademark of Realtek Semiconductor Corporation. Other names mentioned in this document
are trademarks/registered trademarks of their respective owners.
ti ze LICENSE
n i This product is covered by one or more of the following patents: US5,307,459, US5,434,872,
e r US5,732,094, US6,570,884, US6,115,776, and US6,327,625.
id ho USING THIS DOCUMENT
f t This document is intended for the software engineer’s reference and provides detailed programming
n u information.
co a 21 Though every effort has been made to ensure that this document is current and accurate, more information
t : may have become available subsequent to the production of this guide.
k n C 1 ELECTROSTATIC DISCHARGE (ESD) WARNING
e e E 2 This product can be damaged by Electrostatic Discharge (ESD). When handling, care must be taken.
t m M : Damage due to inappropriate handling is not covered by warranty.
al cu WT 13 Do not open the protective conductive packaging until you have read the following, and are at an
approved anti-static workstation.
Re do 6 • Use an approved anti-static mat to cover your work surface.
1 • Use a conductive wrist strap attached to a good earth ground
e - • Always discharge yourself by touching a grounded bare metal surface or approved anti-static mat
h 1 before picking up an ESD-sensitive electronic component
T 1 • If working on a prototyping board, use a soldering iron or station that is marked as ESD-safe
- • Always disconnect the microcontroller from the prototyping board when it is being worked on
17 REVISION HISTORY
Bluetooth 5 Dual Mode SOC
Track ID: JATR-8275-15 Rev. 0.9