RECTRON
SEMICONDUCTOR
TECHNICAL SPECIFICATION
SURFACE MOUNT GPP
TRANSIENT VOLTAGE SUPPRESSOR
1500 WATT PEAK POWER 5.0 WATTS STEADY STATE
TVS
1.5FMCJ
SERIES
FEATURES
* Plastic package has underwriters laboratory
* Glass passivated chip construction
* 1500 watt surage capability at 1ms
* Excellent clamping capability
* Low zener impedance
* Fast response time
DO-214AB
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 oC ambient temperature unless otherwise specified.
0.125 (3.17)
0.115 (2.92)
0.280 (7.11)
0.260 (6.60)
0.245 (6.22)
0.220 (5.59)
0.103 (2.62)
0.079 (2.06)
0.060 (1.52)
0.030 (0.76)
0.012 (0.305)
0.006 (0.152)
0.320 (8.13)
0.305 (7.75)
0.008 (0.203)
0.004 (0.102)
Dimensions in inches and (millimeters)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA suffix for types 1.5FMCJ6.8 thru 1.5FMCJ200
Electrical characteristics apply in both direction
MAXIMUM RATINGS (At TA = 25oC unless otherwise noted)
RATINGS
Peak Power Dissipation with a 10/1000uS ( Note 1,2, Fig.1 )
Peak Pulse Current with a 10/1000uS Waveform
( Note 1, Fig.3 )
Steady State Power Dissipation at TL = 75oC ( Note 2 )
Peak Forward Surge Current, 8.3ms single half sine wave-
superimmposed on rated load( JEDEC METHOD )( Note 2,3 )
Maximum Instantaneous Forward Voltage at 50A for unidirectional only
( Note 3,4 )
Operating and Storage Temperature Range
SYMBOL
PPPM
IPPM
PM(AV)
IFSM
VF
TJ, TSTG
VALUE
Minimum 1500
SEE TABLE 1
5.0
200
SEE NOTES 4
-55 to + 150
NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25oC per Fig.2.
2. Mounted on 0.31 X 0.31” (8.0 X 8.0mm) copper pads to each terminal.
3. Measured on 8.3mS single half sine-wave or equivaient square wave, duty cycle = 4 pulses per minute maximum.
4. VF = 3.5V on 1.5FMCJ6.8 thru 1.5FMCJ90 diveces and VF = 5.0V on 1.5FMCJ100 thru 1.5FMCJ400 devices.
UNITS
Watts
Amps
Watts
Amps
Volts
0C
2003-12
