Overview: Ceramic, Seam-Sealed, SMD, Crystal 495-24.8832-2 For use with IDT’s VCXO-based Synchronization PLLs DATASHEET Specifications Parameters Ratings/Units Frequency 24.8832 MHz Resonance Mode Fundamental Frequency Tolerance @ 25°C ±10 PPM Frequency Stability, ref @ 25°C Over Operating Temperature Range ±20 PPM Temperature Range: Operating (TOPR) Storage (TSTG) -40°C ~ +85°C -40°C ~ +85°C Equivalent Series Resistance (ESR) 40 Ohms Shunt Capacitance (CO) 7.0 pF Load Capacitance (CL) 10 pF Drive Level 0.2 mW Pullability 7.5 ~ 14.8 pF ±80 PPM Aging 10 years ±11 PPM Maximum Soldering Temperature/Time 260°C / 10 seconds Moisture Sensitivity Level (MSL) 1 Termination Finish Au Weight (Typ) 42.78 mg Note: Dimensional drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, etc. may vary. The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no responsibility is assumed by IDT for inaccuracies. All specifications subject to change without notice. Package Outline and Dimensions (JB4) Ordering Information Part / Order Number 495-24.8832-2JB4I 495-24.8832-2JB4I8 Shipping Packaging Cut-Tape
Tape and Reel 495-24.8832-2 REVISION A 03/24/15 Package 5.0 x 3.2 x 0.7 mm JB4 5.0 x 3.2 x 0.7 mm JB4
1 Temperature -40 to +85 C -40 to +85 C
©2015 Integrated Device Technology, Inc. Corporate Headquarters 6024 Silver Creek Valley Road San Jose, CA 95138 USA Sales 1-800-345-7015 or 408-284-8200 Fax: 408-284-2775 www.IDT.com Tech Support email: clocks@idt.com DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion.
