Overview: HCMOS, Ceramic, Seam-Sealed, SMD, Oscillator Specifications Parameters Frequency Frequency Stability 1: Temperature Range: Operating (TOPR) Storage (TSTG) Supply Voltage (VDD) Input Current (IDD) Output Symmetry (@ 50% VDD) Rise Time (10% ~ 90% VDD) (TR) Fall Time (90% ~ 10% VDD) (TF) Output Voltage (HCMOS) (VOL) (VOH) Output Current (IOL) (IOH) Output Load (HCMOS) Standby Current (VIL < 30%VDD) Startup Time (TS) Output Disable Time 2 Output Enable Time 2 Maximum Soldering Temperature / Time Moisture Sensitivity Level (MSL) Termination Finish Ratings/Units 12.800 MHz ±10PPM Max
-40°C ~ +85°C -40°C ~ +85°C
3.3 V ±5% 7 mA Max 45% / 55%
5 nS 5 nS 10% VDD Max 90% VDD Max 4 mA Min -4 mA Min 15 pF Max 10 µA Max 10 mS Max 250 nS Max 10 mS Max 260°C / 10 seconds
1 Au 826A-12.8-1
DATASHEET Enable/Disable Function 2 Pin 1 Output (Pin 3) Open Active ‘1’ Level VIH > 70%VDD Active ‘0’ Level VIH < 30%VDD High Z 1 Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, aging, shock, and vibration. 2 internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open. Note: A 0.01µF bypass capacitor should be placed between VDD (Pin 4) and GND (Pin 2) to minimize power supply line noise. Note: The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no responsibility is assumed by IDT for inaccuracies. Dimensional drawing below is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary. All specifications subject to change without notice. 826A-12.8-1 REVISION A 04/03/15 1 ©2015 Integrated Device Technology, Inc.
