8V97053 Datasheet | Renesas

Description The 8V97053 is a high-performance Wideband RF Synthesizer / PLL optimized for use as the local oscillator (LO) in Multi-Carrier, Multi-mode FDD, and TDD Base Station radio card. It is offered in a pact 5 5, 32-VFQFPN. The 8V97053 Wideband RF Synthesizer / PLL offers a default Fractional Mode with the option to use it with an Integer mode. It requires an external loop filter. The 8V97053 with integrated Voltage Controlled Oscillator (VCO) supports output frequencies from 34.375MHz to 4400MHz, and maintains superior phase noise and spurious performance. RF_OUT[A:B] output drivers have independently programmable output power ranging from - 4d Bm to +7d Bm. The RF_OUT outputs can be muted. The mute function is accessible via a SPI mand or mute pin. The operation of the 8V97053 is controlled by writing to registers through a 3-wire SPI interface. The 8V97053 has an additional option that allows users to read back values from registers by configuring the MUX_OUT pin as a SDO for the SPI interface. The SPI interface is patible with 1.8V logic and is tolerant to 3.3V. In multi-service base stations, very low noise oscillators are required to generate a large variety of frequencies to the mixers while maintaining excellent phase noise performance and low power. The 8V97053 offers a large tuning range capable of providing multi-band local oscillator (LO) frequency synthesis in multi-mode base stations, thus limiting the use of multiple narrow band RF Synthesizers and reducing the BOM plexity and cost. The device can operate over -40°C to +85°C industrial temperature range. Features - Dual Differential Outputs - Output frequency range: 34.375MHz to 4400MHz (continuous range) - RF Output Divide by 1, 2, 4, 8, 16, 32, 64 - Open Drain Outputs (see Output Clock Distribution) - Fractional-N synthesizer (also supports Integer-N mode) - 16-bit integer and 12-bit fractional (16-bit fractional when using the register 7) - 3- or 4-wire SPI interface (patible with 3.3V and...