AT25DL081
AT25DL081 is 1.65V Minimum SPI Serial Flash Memory manufactured by Renesas.
Features
- Single 1.65V
- 1.95V supply
- Serial Peripheral Interface (SPI) patible
- Supports SPI Modes 0 and 3
- Supports Rapid S™ operation
- Supports Dual-Input Program and Dual-Output Read
- Very high operating frequencies
- 100MHz for Rapid S
- 85MHz for SPI
- Clock-to-output time (t V) of 5ns maximum
- Flexible, optimized erase architecture for code + data storage applications
- Uniform 4KB, 32KB, and 64KB Block Erase
- Full Chip Erase
- Individual sector protection with Global Protect/Unprotect feature
- 16 sectors of 64KB each
- Hardware controlled locking of protected sectors via WP pin
- Sector Lockdown with permanent freeze option
- Make any bination of 64KB sectors permanently read-only
- 128-byte, One-Time Programmable (OTP) Security Register
- 64-bytes factory pre-programmed, 64-bytes user programmable
- Flexible programming
- Byte/Page Program (1 to 256 bytes)
- Fast Program and Erase times
- 1.0ms typical Page Program (256 bytes) time
- 50ms typical 4KB Block Erase time
- 250ms typical 32KB Block Erase time
- 550ms typical 64KB Block Erase time
- Program and Erase Suspend/Resume
- Automatic checking and reporting of erase/program failures
- Software controlled reset
- JEDEC Standard Manufacturer and Device ID Read Methodology
- Low power dissipation
- 10m A Active Read current (typical at 20MHz)
- 8µA Deep Power-Down current (typical)
- Endurance: 100,000 program/erase cycles
- Data retention: 20 years
- plies with full industrial temperature range
- Industry standard green (Pb/halide-free/Ro HS-pliant) package options
- 8-lead SOIC (0.150”...
