EL1526 Datasheet | Renesas

feature of Maximus CO chipset. This feature allows DMT tones to carry higher than 15 bits per tone, resulting in higher performance ADSL services. The EL1526 is an integral part of the signal chain for HBL. The driver has been optimized for flat gain response and reduced harmonic distortion and noise in the bands of interest to improve the overall signal to noise in the system. A unique internal pensation circuit eliminates the need for external mon mode snubber filters in active termination applications. These drivers achieve a total harmonic distortion (THD) measurement of typically -64d B @ 2.2MHz, while consuming typically 5m A per DSL channel of total supply current. This supply current can be set using a resistor on the IADJ pin. Two other pins (C0 & C1) can also be used to adjust supply current to one of four pre-set modes (full-IS, 3/4-IS, 1/2-IS, and full power-down). The EL1526 operates on ±5V to ±12V supplies and retains its bandwidth and linearity over the plete supply range. The device is supplied in the small footprint (4x5mm) 24-pin QFN package and is specified for operation over the full -40°C to +85°C temperature range. Ordering Information PART NUMBER PACKAGE TAPE & REEL PKG. DWG. # EL1526IL 24-Pin QFN - MDP0046 EL1526IL-T7 24-Pin QFN 7” MDP0046 EL1526IL-T13 24-Pin QFN 13” MDP0046 EL1526ILZ (See Note) 24-Pin QFN (Pb-Free) - MDP0046 EL1526ILZ-T7 (See Note) 24-Pin QFN (Pb-Free) 7” MDP0046 EL1526ILZ-T13 (See Note) 24-Pin QFN (Pb-Free) 13” MDP0046 NOTE: Intersil Pb-free products employ special Pb-free material sets; molding pounds/die attach materials and 100% matte tin plate termination finish, which are Ro HS pliant and patible with both Sn Pb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pbfree requirements of IPC/JEDEC J STD-020C. CD 8 CD 9 S+ 10 NC 11 NC 12 Features - 450m A output drive capability - 44.1VP-P differential output drive...