Datasheet4U Logo Datasheet4U.com

EL2082 - Current-Mode Multiplier

General Description

TEMP MIN TYP MAX UNITS VIO IOO RINI VCMRR ICMRR VPSRR IPSRR IBVIN RINV Nlini ROUT VOUT VIOG AI Nling ISO VINH VINL ILH ILL IODIS IS Input Offset Voltage Output Offset Current IIN Input Impedance; IIN = 0, 0.35mA Voltage Common-Mode Rejection Ratio, VIN = -10V, +10V Offset Current Common-Mode Re

Key Features

  • Flexible inputs and outputs, all ground referred.
  • 150MHz large and small-signal bandwidth.
  • 46dB of calibrated gain control range.
  • 70dB isolation in disable mode @ 10MHz.
  • 0.15% diff gain and 0.05° diff phase performance at NTSC using.

📥 Download Datasheet

Datasheet Details

Part number EL2082
Manufacturer Renesas
File Size 864.30 KB
Description Current-Mode Multiplier
Datasheet download datasheet EL2082 Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EL2082 Current Mode Multiplier OBSOLETE PRODUCT NO RECOMMENDED REPLACEMENT contact our Technical Support Center at 1-888-INTERSIL or www.intersil.com/tsc DATASHEET FN7152 Rev 0.00 January 1996 The EL2082 is a general purpose variable gain control building block, built using an advanced proprietary complementary bipolar process. It is a two-quandrant multiplier, so that zero or negative control voltages do not allow signal feedthrough and very high attenuation is possible. The EL2082 works in current mode rather than voltage mode, so that the input impedance is low and the output impedance is high. This allows very wide bandwidth for both large and small signals.