Datasheet4U Logo Datasheet4U.com

EL5106 - 350MHz Fixed Gain Amplifier

General Description

CONDITIONS MIN AC PERFORMANCE BW BW1 -3dB Bandwidth 0.1dB Bandwidth AV =

Key Features

  • Pb-free available (RoHS compliant).
  • Gain selectable (+1, -1, +2).
  • 350MHz -3dB BW (AV = 2).
  • 1.5mA supply current per amplifier.
  • Fast enable/disable.
  • Single and dual supply operation, from 5V to 12V.
  • Available in SOT-23 packages.
  • 450MHz, 3.5mA product available (EL5108 and EL5308).

📥 Download Datasheet

Datasheet Details

Part number EL5106
Manufacturer Renesas
File Size 795.23 KB
Description 350MHz Fixed Gain Amplifier
Datasheet download datasheet EL5106 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
EL5100 200MHz Slew Enhanced VFA Intersil Corporation
EL5101 200MHz Slew Enhanced VFA Intersil Corporation
EL5102 Slew Enhanced VFAs Intersil Corporation
EL5103 Slew Enhanced VFAs Intersil Corporation
EL51 Output Pentode Philips

Other Datasheets by Renesas

Part Number Description
EL5104 700MHz Slew-Enhanced VFAs
EL5105 700MHz Slew-Enhanced VFAs
EL5108 450MHz Fixed Gain Amplifier
EL5111 Op Amp
EL5111T Operational Amplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DATASHEET EL5106, EL5306 350MHz Fixed Gain Amplifiers with Enable FN7357 Rev 8.00 September 10, 2015 The EL5106 and EL5306 are fixed gain amplifiers with a bandwidth of 350MHz. This makes these amplifiers ideal for today’s high speed video and monitor applications. They feature internal gain setting resistors and can be configured in a gain of +1, -1 or +2. With a supply current of just 1.5mA and the ability to run from a single supply voltage from 5V to 12V, these amplifiers are also ideal for handheld, portable or battery powered equipment. The EL5106 and EL5306 also incorporate an enable and disable function to reduce the supply current to 25µA typical per amplifier. Allowing the CE pin to float or applying a low logic level will enable the amplifier.