EL5172, EL5372
250MHz Differential Line Receivers
The EL5172 and EL5372 are single and triple high
bandwidth amplifiers designed to extract the difference
signal from noisy environments. They are primarily targeted
for applications such as receiving signals from twisted-pair
lines or any application where common mode noise injection
is likely to occur.
The EL5172 and EL5372 are stable for a gain of one and
requires two external resistors to set the voltage gain.
The output common mode level is set by the reference pin
(VREF), which has a -3dB bandwidth of over 120MHz.
Generally, this pin is grounded but it can be tied to any
voltage reference.
The output can deliver a maximum of ±60mA and is short
circuit protected to withstand a temporary overload
condition.
The EL5172 is available in the 8 Ld SOIC and 8 Ld MSOP
packages and the EL5372 in a 24 Ld QSOP package. Both
are specified for operation over the full -40°C to +85°C
temperature range.
Pinouts
EL5172
(8 LD SOIC, MSOP)
TOP VIEW
EL5372
(24 LD QSOP)
TOP VIEW
FB 1
IN+ 2
IN- 3
REF 4
+
-
8 OUT REF1 1
7 VS-
INP1 2
6 VS+ INN1 3
5 EN
NC 4
REF2 5
INP2 6
INN2 7
NC 8
REF3 9
INP3 10
INN3 11
NC 12
+
-
+
-
+
-
24 NC
23 FB1
22 OUT1
21 NC
20 VSP
19 VSN
18 NC
17 FB2
16 OUT2
15 EN
14 FB3
13 OUT3
DATASHEET
FN7311
Rev 11.00
August 11, 2015
Features
• Differential input range ±2.3V
• 250MHz 3dB bandwidth
• 800V/µs slew rate
• 60mA maximum output current
• Single 5V or dual ±5V supplies
• Low power - 5mA to 6mA per channel
• Pb-free available (RoHS compliant)
Applications
• Twisted-pair receivers
• Differential line receivers
• VGA over twisted-pair
• ADSL/HDSL receivers
• Differential to single-ended amplification
• Reception of analog signals in a noisy environment
FN7311 Rev 11.00
August 11, 2015
Page 1 of 16
