Datasheet Summary
Quadruple 2-line-to-1-line Data Selectors / Multiplexers (with three-state outputs)
REJ03D0470- 0300 Rev.3.00
Jul.15.2005
This multiplexer Features three-state outputs that can interface directly with and drive data lines of bus-organized systems. With all but one of the mon outputs disabled (at a high-impedance state) the low impedance of the single enabled output will drive the bus line to a high or low logic level.
To minimize the possibility that two outputs will attempt to take a mon bus to opposite logic levels, the outputenable circuitry is designed such that the output disable times are shorter than the output enable times.
Features
- Ordering Information
Part...
