ICS501A
ICS501A is PLL CLOCK MULTIPLIER manufactured by Renesas.
LOCO™ PLL CLOCK MULTIPLIER
Description
The ICS501A LOCOTM is the most cost effective way to generate a high quality, high frequency clock output from a lower frequency crystal or clock input. The name LOCO stands for Low Cost Oscillator, as it is designed to replace crystal oscillators in most electronic systems. Using Phase-Locked Loop (PLL) techniques, the device uses a standard fundamental mode, inexpensive crystal to produce output clocks up to 200 MHz.
Stored in the chip’s ROM is the ability to generate nine different multiplication factors, allowing one chip to output many mon frequencies (see table on page 2).
The device also has an output enable pin which tri-states the clock output when the OE pin is taken low.
This product is intended for clock generation. It has low output jitter (variation in the output period), but input to output skew and jitter are not defined or guaranteed. For applications which require defined input to output skew, use the ICS570B.
Block Diagram
Features
- Packaged as 8-pin SOIC (Pb-free) or die
- IDT’s lowest cost PLL clock
- Zero ppm multiplication error
- Input crystal frequency of up to 27 MHz
- Input clock frequency of up to 50 MHz
- Output clock frequencies up to 200 MHz
- Extremely low jitter of 25 ps (one sigma)
- patible with all popular CPUs
- Duty cycle of 45/55 up to 200 MHz
- Nine selectable frequencies
- Operating voltage of 3.3 V
- Tri-state output for board level testing
- 25 m A drive capability at TTL levels
- Ideal for oscillator replacement
- Optimized for output frequencies of up to 200 MHz
(166 MHz maximum for industrial temperature version)
- Industrial temperature version available
- Advanced, low power CMOS process
S1:0 2
Crystal or Clock input
X1/ICLK X2
Crystal O s c illa to...
