ISL29013
ISL29013 is Light-to-Digital Output Sensor manufactured by Renesas.
Light-to-Digital Output Sensor with High Sensitivity, Gain Selection, Interrupt Function and I2C Interface
FN6485 Rev 3.00 November 11, 2011
The ISL29013 is an integrated light sensor with I2C (SMBus patible) interface. It has an internal signed15-bit integrating type ADC designed based on the chargebalancing A/D conversion technique. This ADC is capable of rejecting 50Hz and 60Hz flicker caused by artificial light sources. The lux range select feature allows the user to program the lux range for optimized counts/lux.
In normal operation, power consumption is typically 250µA. Furthermore, a power-down mode can be controlled by software via the I2C interface, reducing power consumption to less than 1µA.
The ISL29013 supports a hardware interrupt that remains asserted low until the host clears it through I2C interface.
Designed to operate on supplies from 2.5V to 3.3V, the ISL29013 is specified for operation over the -40°C to +85°C ambient temperature range.
Ordering Information
PART NUMBER (Notes 1, 2, 3)
TEMP.
PACKAGE
RANGE (°C) (Pb-Free)
PKG. DWG. #
ISL29013IROZ-T7
-40 to +85 6 Ld ODFN L6.2x2.1
ISL29013IROZ-EVALZ Evaluation Board
NOTES:
1. Please refer to TB347 for details on reel specifications.
2. These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding pounds/die attach materials and 100% matte tin plate
- e3 termination finish, which is Ro HS pliant and patible with both Sn Pb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
3. For Moisture Sensitivity Level (MSL), please see device information page for ISL29013. For more information on MSL please see tech brief TB466.
Pinout
ISL29013 (6 LD ODFN)
TOP VIEW
VDD 1
6 SDA
GND 2 REXT 3
THERMAL PAD-
5 SCL 4 INT
- THERMAL PAD CAN BE CONNECTED TO GND OR ELECTRICALLY ISOLATED
Features...
