Datasheet4U Logo Datasheet4U.com

ISL32274E - Quad Transmitter

Key Features

  • and configurations by device number. Features.
  • Fault Protected RS-485 Bus Pins.
  • . . . . up to ±60V.
  • Extended Common Mode Range.
  • . . . . ±25V More Than Twice the Range Required for RS-485.
  • Cable Invert Pins (Except ISL31480) Corrects for Reversed Cable Connections While Maintaining Rx Full Fail-safe Functionality.
  • Logic Supply (VL) Pin (ISL31480E, ISL31486E) Simplifies Interface to Lower Voltage Logic Devices.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ISL3282EMRTEP RS-485/422 Receiver Intersil
ISL3298EMRTEP Low Power RS-485/RS-422 Transmitter Intersil
ISL3084 VCO Intersil Corporation
ISL3090 10GHz Vco Intersil Corporation
ISL3092 11GHz VCO Intersil Corporation

Other Datasheets by Renesas

Part Number Description
ISL32272E RS-422 Transmitters
ISL32273E Quad Receivers
ISL32275E Quad Receivers
ISL32277E Quad Receivers
ISL32172E RS-422 Transmitters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Fault Protected, Extended CMR, RS-485/RS-422 Transceivers with Cable Invert ISL31480E, ISL31483E, ISL31485E, ISL31486E The ISL3148xE are fault protected, 5V powered differential transceivers that exceed the RS-485 and RS-422 standards for balanced communication. The RS-485 transceiver pins (driver outputs and receiver inputs) are fault protected up to ±60V. Additionally, the extended common mode range allows these transceivers to operate in environments with common mode voltages up to ±25V (>2X the RS-485 requirement), making this fault protected RS-485 family one of the most robust on the market. Transmitters deliver an exceptional 2.5V (typical) differential output voltage into the RS-485 specified 54Ω load.