Datasheet4U Logo Datasheet4U.com

ISL9519 Datasheet Narrow VDC Regulator/Charger

Manufacturer: Renesas

Overview: DATA SHORT To request the full datasheet, please visit www.intersil.com/products/isl9519 ISL9519 Narrow VDC Regulator/Charger with SMBus Interface FN6773 Rev 3.00 March 1, 2012 The ISL9519 is a highly integrated Narrow VDC system voltage regulator and battery charger controller. Operating parameters are programmable over the System Management Bus (SMBus). The ISL9519 is designed for applications where the system power source is either the battery pack or the output of the regulator/charger. This makes the max voltage to the system equal to the max battery voltage instead of the max adapter voltage. The ISL9519 also includes a patented system to control trickle charging deeply discharged batteries while maintaining system voltage at a user defined minimum. High efficiency is achieved with a DC/DC synchronous-rectifier buck converter, equipped with diode emulation and variable switching frequency for enhanced light load efficiency and AC-adapter boosting prevention. The ISL9519 can charge one, two or three series connected Lithium-ion cells, at up to 8A charge current. Default settings for 1-, 2- or 3-cell operation at power-up are selected by an external pin. Integrated MOSFET drivers and bootstrap diode result in fewer components and smaller implementation area. Low offset current-sense amplifiers provide high accuracy. The ISL9519 provides an open drain digital output that indicates the presence of the AC-adapter. The ISL9519 also provides an analog output that indicates the adapter current.

Key Features

  • ±0.5% System Voltage Accuracy (-10°C to +100°C).
  • ±3% Accurate Input Current Limit (-10°C to +100°C).
  • ±3% Accurate Battery Charge Current Limit.
  • Variable Switching Frequency at Light Load Conditions for Higher Efficiency.
  • Fixed Frequency Operation at Higher Loads - Fixed Frequency Mode can be Forced by an External Pin.
  • Trickle Charge System for Deeply Discharged Batteries - Automatic Trickle Charge Current (256mA) - Holds Minimum Voltage to S.