900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Renesas Electronics Components Datasheet

M30833FJFP Datasheet

SINGLE-CHIP 16/32-BIT CMOS MICROCOMPUTER

No Preview Available !

M32C/83 Group (M32C/83, M32C/83T)
SINGLE-CHIP 16/32-BIT CMOS MICROCOMPUTER
REJ03B0013-0141
Rev.1.41
Jan. 31, 2006
1. Overview
The M32C/83 Group (M32C/83, M32C/83T) microcomputer is a single-chip control unit that utilizes high-
performance silicon gate CMOS technology with the M32C/80 Series CPU core. The M32C/83 Group
(M32C/83, M32C/83T) is available in 144-pin and 100-pin plastic molded LQFP/QFP packages.
With a 16-Mbyte address space, this microcomputer combines advanced instruction manipulation capabili-
ties to process complex instructions by less bytes and execute instructions at higher speed.
It includes a multiplier and DMAC adequate for office automation, communication devices and industrial
equipments, and other high-speed processing applications.
1.1 Applications
Automobiles, audio, cameras, office equipment, communications equipment, portable equipment, etc.
Rev. 1.41 Jan.31, 2006 Page 1 of 91
REJ03B0013-0141


Renesas Electronics Components Datasheet

M30833FJFP Datasheet

SINGLE-CHIP 16/32-BIT CMOS MICROCOMPUTER

No Preview Available !

M32C/83 Group (M32C/83, M32C/83T)
1.2 Performance Overview
Tables 1.1 and 1.2 list performance overview of the M32C/83 Group (M32C/83, M32C/83T).
Table 1.1 M32C/83 Group (M32C/83, M32C/83T) Performance (144-Pin Package)
Characteristic
Performance
M32C/83
M32C/83T
CPU
Basic Instructions
108 instructions
Minimum Instruction Execution Time 31.3 ns (f(BCLK)=32 MHz, VCC=4.2 to 5.5 V)(3) 31.3 ns (f(BCLK)=32 MHz, VCC=4.2 to 5.5 V)(3)
50 ns (f(BCLK)=20 MHz, VCC=3.0 to 5.5 V)
Operating Mode
Single-chip mode, Memory expansion Single-chip mode
mode and Microprocessor mode
Address Space
16 Mbytes
Memory Capacity
See Table 1.3
Peripheral I/O Port
123 I/O pins and 1 input pin
Function Multifunction Timer
Timer A: 16 bits x 5 channels, Timer B: 16 bits x 6 channels
Three-phase motor control circuit
Intelligent I/O
Time measurement function: 16 bits x 12 channels
Waveform generating function: 16 bits x 28 channels
Communication function (Clock synchronous serial I/O, Clock asynchronous se-
rial I/O, HDLC data processing, Clock synchronous variable length serial I/O,
IEBus(1), 8-bit or 16-bit Clock synchronous serial I/O)
Serial I/O
5 Channels
Clock synchronous serial I/O, Clock asynchronous serial I/O, IEBus(1), I2C bus(2)
CAN Module
1 channel Supporting CAN 2.0B specification
A/D Converter
10-bit A/D converter: 2 circuit, 34 channels
D/A Converter
8 bits x 2 channels
DMAC
4 channels
DMAC II
Can be activated by all peripheral function interrupt sources
Immediate transfer, Calculation transfer and Chain transfer functions
DRAM
CAS before RAS refresh, Self-reflesh, EDO, EP
CRC Calculation Circuit
CRC-CCITT
X/Y Converter
16 bits x 16 bits
Watchdog Timer
15 bits x 1 channel (with prescaler)
Interrupt
42 internal and 8 external sources, 5 software sources, Interrupt priority level: 7
Clock Generation Circuit
4 circuits
Main clock oscillation circuit(*), Sub clock oscillation circuit(*), On-chip oscillator,
PLL frequency synthesizer
(*)Equipped with a built-in feedback resistor. Ceramic resonator or crystal oscilla-
tor must be connected externally
Oscillation Stop Detect Function
Main clock oscillation stop detect function
Electrical Supply Voltage
4.2 to 5.5 V (f(BCLK)=32 MHz)
4.2 to 5.5 V (f(BCLK)=32 MHz)
Charact-
3.0 to 5.5 V (f(BCLK)=20 MHz, through VDC)
eristics
3.0 to 3.6 V (f(BCLK)=20 MHz,
not through VDC)
Power Consumption
41 mA (VCC=5 V, f(BCLK)=32 MHz)
41 mA (VCC=5 V, f(BCLK)=32 MHz)
38 mA (VCC=5 V, f(BCLK)=30 MHz)
38 mA (VCC=5 V, Vf(BCLK)=30 MHz)
26 mA (VCC=3.3 V, f(BCLK)=20 MHz) 470 µA (VCC=5 V, f(XCIN)=32 kHz,
470 µA (VCC=5 V, f(XCIN)=32 kHz,
in wait mode)
in wait mode)
0.4 µA (VCC=5 V, stop mode)
340 µA (VCC=3.3 V, f(XCIN)=32 kHz,
through VDC, in wait mode)
5.0 µA (VCC=3.3 V, f(XCIN)=32 kHz,
not through VDC, in wait mode)
0.4 µA (VCC=5 V, stop mode)
0.4 µA (VCC=3.3 V, stop mode)
Flash Program/Erase Supply Voltage
3.3 ± 0.3 V or 5.0 ± 0.5 V
5.0 ± 0.5 V
Memory Program and Erase Endurance
100 times
Operating Ambient Temperature
–20 to 85oC, –40 to 85oC (optional)
–40 to 85oC (T version)
Package
144-pin plastic molded LQFP
NOTES:
1. IEBus is a trademark of NEC Electronics Corporation.
2. I2C bus is a trademark of Koninklijke Philips Electronics N. V.
3. Contact our sales office if 30-MHz or higher frequency is required.
All options are on a request basis.
Rev. 1.41 Jan.31, 2006 Page 2 of 91
REJ03B0013-0141


Part Number M30833FJFP
Description SINGLE-CHIP 16/32-BIT CMOS MICROCOMPUTER
Maker Renesas
Total Page 30 Pages
PDF Download

M30833FJFP Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 M30833FJFP SINGLE-CHIP 16/32-BIT CMOS MICROCOMPUTER
Renesas





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy